Advertisement
Quick Links
Advertisement
Related Manuals for AAD S-7
Summary of Contents for AAD S-7
- Page 1 S-series Loudspeakers Owner s Information...
- Page 2 S-Series Loudspeakers Owner's Information Introduction Thank you for choosing loudspeakers. Their refined and natural sound character will greatly enhance your listening pleasure. Great attention to detail has gone into the design and manufacturing of loudspeakers, which are built with only the finest materials.
- Page 3 S-Series products Refer to Table 1 for specifications SR-1 SR-2 S-3C S-160...
- Page 4 Placement Two Channel Stereo Application For stereo listening, you may choose any one pair of bookshelf or rear surround or floor standing model. The size of speakers should be determined by the size of your living space so that they can provide sufficient volume. The two loudspeakers should be placed an equal distance from your listening position.
- Page 5 FIG. 1 loudspeaker connection terminal on the receiver or amplifier. The black terminal on the loudspeaker should be connected to the black or (-) loudspeaker connecation terminal on the receiver or amplifier. Connecting the loudspeakers in this manner ensures that they will be in phase;...
- Page 6 3. Do not use the subwoofer near water or expose them to rain or moisture. 4. Always unplug the power cord first when making connections. Switch power on only after you check and make sure all connections are made correctly. 5.
- Page 7 Functions and Connections Please refer to rear panel of the subwoofer (Fig.2) for functions on the amplifier. Fig. 2 Power switch on/off Upper position: Power on Lower position: Power off Middle position: Auto on At this position the subwoofer amplifier is in a stand by mode, awaiting an input signal.
- Page 8 Phase Control Use this control to determine the best possible bass performance of your system. There can be interference between your main speakers and subwoofer at the frequency where they cross over due to placement, room acoustics and type of main speakers used.
- Page 9 Connection Please see diagrams below for different method of connecting the subwoofer to your main amplifier/receiver. It may be possible to use alternative connecting methods. Please refer to the owner's manual of your amplifier/receiver or seek professional advice from your retailer or installer. CAUTION! Before switching power on, please make sure all connections are made properly, i.e., positive to positive, negative to negative.
- Page 11 Placement of Subwoofer The subwoofer can be placed virtually anywhere in your room without affecting the stereo image of your main speakers. Placing the unit in a corner of the room will yield the greatest bass output but may not provide the best sound, as this position will cause maximum room mode resonance.
-
Page 12: S-Series Specifications
S-series Specifications S-7* S-5* S-3C SR-1 SR-2 Tweeter 1X1 titanium dome titanium dome Woofer 1 4.5 2 4.5 paper cone paper cone paper cone paper cone paper cone PP cone PP cone Frequency 45Hz-20KHz 30Hz-20KHz 35Hz-20KHz 40Hz-20KHz 70Hz-20KHz 50Hz-20KHz 40Hz-20KHz... - Page 13 www.aadsound.com...