Advertisement
Scanning a document
1
Press
for at least 2 seconds until you hear
a beep to turn on the power.
The power indicator will light red.
2
Press
repeatedly to choose the desired
resolution.
You will hear a beep, and the selected resolution indicator will light.
Resolution types
·
(FINE: For documents with small print)
·
(STANDARD)
·
(PHOTO: For documents containing photographs, etc.)
3
Ò
Place the
Ò
" (document left side) on the document,
and press
You will hear a beep, and the operation indicator will light green
after about 1 or 2 seconds. You can start scanning after the
operation indicator lights green.
4
Press the hand scanner against the document, and
move it slowly towards the direction of the arrow (
When it is scanning properly, the operation indicator will flash green.
Scanning speed for different resolution types.
"
" (STANDARD): Move up to 50mm per second.
"
" (FINE) "
If the scanner is being moved too quickly, you will hear a warning
beep (p.4).
5
After scanning the document, press
You will hear a beep, and the operation indicator will turn off. The
document will be memorized as 1 page.
To continue scanning another page, repeat steps 2 to 5.
6
When you have finished scanning, press
least 2 seconds until you hear a beep to turn off the
power.
Scanner memory capacity
Resolution "
" (FINE)
Resolution "
" (STANDARD)
Resolution "
" (PHOTO)
" (scanning position) and the
" (PHOTO): Move up to 25mm per second.
approx. 30 pages (document paper
size-B5, 700 letters)
approx. 60 pages (document paper
size-B5, 700 letters)
approx. 2 pages (a B5-size
photograph)
POWER
ON
Operation indicator
).
Operation
indicator
Operation
indicator
for at
POWER
OFF
LIGHT
ON
LIGHT
OFF
3
Advertisement
