Diamond Multimedia Viper V770 User Manual page 29

Q: Why won't my screen saver display between
both monitors?
The screen saver you are using does not support multiple monitors. Try using
built-in screen savers, such as the Flying Windows or any of the 3D screen
savers.
Q: Why won't the task bar extend over both
screens?
The task bar is only displayed on one monitor. This is the correct operation.
Q: Why is D3D not accelerated on the second
display adapter?
This is a known issue and is a limitation of either Windows 98 or the
motherboard.
Q: AGP is not the primary adapter. Why not?
That is a limitation of the motherboard. Your primary adapter is whatever
card has the highest bus priority, if you get POST out of the PCI card and not
the AGP card. Contact the motherboard manufacturer for possible solutions.
Q: How many adapters can you have in one
system?
Diamond has tested up to four adapters. According to Microsoft, you can
have as many adapters installed as you want if you adhere to the following:
use Windows 98 drivers, verify that all the hardware is compatible, and have
the resources and slots needed.
Q: How can I get OpenGL to work?
All secondary display adapters must be disabled in order for hardware
OpenGL acceleration to be enabled.
25