NAPCO QuickModem Installation Instructions

333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, (800) 645-9445
For Technical Service, (800) 645-9440
Publicly traded on NASDAQ Symbol: NSSC
© NAPCO 2005

GENERAL DESCRIPTION

The NAPCO Quick-Modem is a modem which is
fully compatible with the NAPCO Quickloader
PCD3000, PCD2000 and PCD-Windows Quick-
loader V4.54 (or higher) downloader programs.

SPECIFICATIONS

Input Power: 9 VAC, 750-1000mA, 9.8 W (from
supplied AC adapter).
CONNECTION
Connect the Quick-Modem to the J2 connector of
the PCI2000 Interface module using a standard
modem cable (not supplied).
CONFIGURATION
PCD3000, PCD2000 and PCD-Windows Quick-
loader software must be configured as follows for
use with the Quick-Modem:
PCD3000
From the PCD main screen (teal screen with the
large NAPCO logo):
Press S for Setup
Press M for Modem Setup
Select the StarComm 2400 Data (model
2400E-030) modem
Modem type (Select StarComm 2400 Data
(model 2400E-030) )
port none COM1 COM2 COM3 COM4
(select the Comm port for Quick-Modem)
NAPCO Security Systems, Inc.
333 Bayview Avenue
For Sales and Repairs, call Toll Free: (800) 645-9445
R
INSTALLATION INSTRUCTIONS
Amityville, New York 11701
Quick-Modem
physical type
carrier detect
call monitor
speaker volume
Telephone line:
dialing mode
dialtone type
telephone number
dial-out prefix
Press [ESC]
•
Press X for EXit
•
The settings will be checked for errors. If none are
found, a message will display:
[Local Configuration values changed]
Save changes?
Press [Y] to accept the changes and exit
•
Setup.
PCD2000
Go to the DOS directory in which PCD2000 is
installed cd\PCD2000 (or the directory name in
which PCD2000 is installed).
Type SETUP
•
Select option A Basic Setup
•
PCI Module installed?
For Technical Assistance, Contact the NAPCO
Toll Free Helpline
WI1066C 5/05
external internal
slow fast
none connect
(select preference)
1 2 3 4
(select preference)
rotary TouchTone
nonstandard
Yes No
(800) 645-9440
always
standard