Graphic Illustration - M-Audio X-Session UC-17 Quick Start Manual

Graphic Illustration

1. One 60mm fader labelled C17 - C18, assignable
to two controllers.
2. Sixteen rotary controllers numbered C1 - C16, all
of which are fully MIDI assignable.
3. Ten assignable MIDI buttons numbered C19 -
C28, double up as a numeric keypad (0-9) in
Edit mode.
4. +/- Buttons. Dual press function sends out Snap
Shot command.
5. Dual press function button commands for
MIDI Out From USB, Global MIDI Channel and
Controller Mute.
6. Single press function button commands for
Controller Select, Controller Assign, Individual
MIDI Channel and Preset Recall.
7. Dual press function button commands for Device
ID and Memory Dump.
8. Single press function button commands for
Program (for sending out program change
messages), Data/LSB, Data/MSB and Store.
9. Backlit LCD display.
10. USB MIDI In/Out connects to the USB port of your computer via the in-cluded USB cable.
11. MIDI In plug used to connect other MIDI hardware to the UC-33 via a standard MIDI 5-Pin DIN type plug (not
included).
12, MIDI Out plug used to connect the UC-33 to other MIDI hardware via a standard MIDI 5-Pin DIN type plug (not
included).
13. Power on/off switch.
14. DC In plug for connection of 9v DC power supply (not included).
6 • English