Table Of Contents - Panasonic Lumix DMC-FS9EB Service Manual

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 4
1.1. General Guidelines---------------------------------------- 4
1.2. Leakage Current Cold Check--------------------------- 4
1.3. Leakage Current Hot Check (See Figure 1.) ------- 4
1.4. How to Discharge the Capacitor on Flash Top
P.C.B. --------------------------------------------------------- 5
2 Warning -------------------------------------------------------------- 6
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices---------- 6
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only) ---------------------------------------------------------- 6
2.3. Caution for AC Cord(For EB) --------------------------- 7
2.4. How to Replace the Lithium Battery ------------------ 8
3 Service Navigation ----------------------------------------------- 9
3.1. Introduction-------------------------------------------------- 9
3.2. General Description About Lead Free Solder
(PbF)---------------------------------------------------------- 9
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ----------------------------------------- 9
3.4. How to Define the Model Suffix (NTSC or PAL
model) -------------------------------------------------------10
4 Specifications ----------------------------------------------------14
5 Location of Controls and Components ------------------15
6 Service Mode -----------------------------------------------------17
6.1. Error Code Memory Function--------------------------17
6.2. ICS (Indication of additional Camera Settings
when picture was taken) function---------------------19
7 Service Fixture & Tools----------------------------------------21
7.1. Service Fixture and Tools-------------------------------21
7.2. When Replacing the Main P.C.B.---------------------22
7.3. Service Position-------------------------------------------22
8 Disassembly and Assembly Instructions ---------------23
8.1. Disassembly Flow Chart --------------------------------23
8.2. PCB Location ----------------------------------------------23
8.3. Disassembly Procedure---------------------------------24
8.4. Lens Disassembly Procedure ------------------------29
8.5. Assembly Procedure for the Lens --------------------31
8.6. Removal of the CCD Unit-------------------------------34
8.7. Removal of the Focus Motor Unit --------------------34
8.8. The Application of Grease Method-------------------35
9 Measurements and Adjustments---------------------------36
9.1. Introduction-------------------------------------------------36
9.2. Before Disassembling the unit ------------------------36
9.3. Details of Electrical Adjustment -----------------------38
9.4. After Adjustment ------------------------------------------41
10 Maintenance-------------------------------------------------------42
10.1. Cleaning Lens and LCD Panel ------------------------42
PAGE
3
PAGE