When Replacing The Main P.c; Service Position - Panasonic Lumix DMC-FS9EB Service Manual

7.2. When Replacing the Main P.C.B.
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at "software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN system", together with Maintenance software.
7.3.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 RFKZ0494
2 RFKZ0416
3 RFKZ0416
4 RFKZ0418
5 RFKZ0553
CAUTION-1. (When servicing FLASH TOP P.C.B.)
1. Be sure to discharge the capacitor on FLASH TOP P.C.B..
Refer to "HOW TO DISCHARGE THE CAPACITOR ON FLASH TOP P.C.B.".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH TOP P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH TOP P.C.B..
Table S1 Extension Cable List
Connection
FP9001 (MAIN) - CCD UNIT
FP9002 (MAIN) - LENS UNIT
FP9003 (MAIN) - LCD UNIT
PP9001 (MAIN) - PS8001 (FLASH TOP)
PS9001 (MAIN) - PP9501 (SUB OPERATION)
22
Form
45PIN 0.3 FFC
41PIN 0.3 FFC
41PIN 0.3 FFC
30PIN B to B
16PIN B to B