Before You Begin; Electrical Requirements - GE AGMO5 Owner's Manual And Installation Instructions

Ge window a/c user manual
Table of Contents

Advertisement

Available languages

Available languages

Preparing to install the air conditioner.
Read these instructions completely and carefully.

Before You Begin

NOTE TO INSTALLER: Leave these instructions with
the air conditioner after installation is completed.
NOTE TO CONSUMER: Keep this Owner's Manual
and Installation Instructions for future use.
IMPORTANT NOTES:
For personal safety, this air conditioner must be
properly grounded.
It is important to have the wall outlet and circuit
checked by a qualified electrician if there is any
doubt as to whether a proper ground exists.
Follow National Electric Codes (NEC) and/or local
codes and ordinances.

Electrical Requirements

These models require 115/120-volt a.c.,
60 Hz grounded outlet protected with
a 15-amp time delay fuse or circuit
breaker.
Tools You Will Need
s
Phillips head screwdriver
s
Flat blade screwdriver
s
Ruler or tape measure
CAUTION:
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not change the plug on the power
cord of this air conditioner.
Aluminum house wiring may present
special problems—consult a qualified
electrician.
The 3-prong grounding plug minimizes the
possibility of electric shock hazard. If the wall outlet
you plan to use is only a 2-prong outlet, it is your
responsibility to have it replaced with a properly
grounded 3-prong wall outlet.
s
Scissors
s
Pencil
s
Level
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents