Hotel Fitness It9800 Treadmill User Manual page 11

9. Connect the pulse wires from the Left and Right Handrail
Assemblies (112, 113) to the pulse wires from the
Console (103). Insert the included ties through the tie
blocks attached to the back of the Console Base (109).
Loop the ties around the pulse wires, the Upright Wire
(116), and the Upright TV Cable (89), then tighten the
ties around the wires.
Insert all wires and cables into the top of the
Upright (93).
10. Attach the Console Base Back (107) with nine #8 x 1/2"
Screws (88) and two #8 x 3/4" Screws (86) as shown. Do
not overtighten the Screws.
11. After the incline trainer is placed in the location where
it will be used (see HOW TO MOVE THE INCLINE
TRAINER on page 13), make sure that both Rear
Leveling Feet (38) and the Base Pads (not shown) rest
firmly on the floor. If the incline trainer rocks even slightly,
turn one of the Rear Leveling Feet clockwise or counter-
clockwise until the rocking motion is eliminated.
9
113
Tie
116
93
10
88
88
86
11
11
112
103
109
Pulse
89
Ties
Wires
93
88
88
107
86
38