Epic Fitness A42t Sport Treadmill User Manual page 10

4. Identify the left handrail assembly (C). Hold
the handrail assembly near the Left Adjustable
Upright (132). Insert the Upright Wire (92)
through the opening on the bottom of the left
handrail assembly.
See the inset drawing. Press the left handrail
assembly (C) onto the Left Adjustable Upright
(132). Be careful not to pinch the Upright
Wire (92). Make sure that the Upright Wire is
resting in the slot at the top of the left Upright.
Attach the left handrail assembly (C) to the Left
Adjustable Upright (132) with two 3/8" x 3 1/4"
Screws (2) and two 3/8" Star Washers (3).
Attach the right handrail assembly (D) to the
Right Adjustable Upright (133) in the same way.
Note: There is no wire on the right side.
5. With the help of a second person, hold the con-
sole assembly (E) near the Upright (96).
Connect the Upright Wire (92) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, connect the pulse wires (F). Make sure to
connect the pulse wires on the right side (not
shown) also.
4
2
3
C
132
C
5
Console
Wire
92
10
92
2
Slot
3
D
133
92
Slot
132
E
F
92
96