Back Panel Connectors - Foxconn R10-H1 User Manual

1-3 back Panel Connectors

PS/2 Keyboard Port
1
2
USB Ports
1. PS/2 Keyboard Port
Use the upper port (purple) to connect a PS/2 Keyboard.
2. USb Ports
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as an
USB keyboard/mouse, USB printer, USB flash drive and etc.
3. DVI-I Port
The DVI-I port supports DVI-I specification. Connect a monitor that supports VGA or DVI-D
connection to this port.
4. HDMI Port
The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video interface
to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI
audio/video device to this port. The HDMI Technology can support a maximum resolution of
1920x1080p but the actual resolutions supported depend on the monitor being used.
5. e-SATA Port
To connect external SATA device(s) to your system by expanding the internal SATA port(s) to
the chassis back panel. External SATA device shall provide power by its own.
6. Audio Ports
For the definition of each audio port, please refer to the table below :
Port 2-channel
Blue Line In
Green Line Out
Pink Microphone In
Orange -
Black -
Grey -
DVI-I Port
3
4
HDMI Port
E-SATA Port
4-channel
Line In
Front Speaker Out
Microphone In
-
Rear Speaker Out
-
LAN Port
2 7
5 2
Audio Ports
5.1-channel
Line In
Front Speaker Out
Microphone In
Center/Subwoofer Out
Rear Speaker Out
-
5
Line Out
Line In
Rear Speaker
Subwoofer
Side Speaker
Microphone In
6
7.1-channel
Line In
Front Speaker Out
Microphone In
Center/Subwoofer Out
Rear Speaker Out
Side Speaker Out