Specifications - Tripp Lite SR1UBRUSH Brochure

Feature Focus
A E F
SRW6U
D B
A
Adjustable Mounting Rails (4)
Front and rear pairs of vertical rails adjust in one-inch increments.
B
Secure Front Door
The door is perforated for ample airflow and locks for secure access. You
can reverse the door swing by rotating the unit 180° before installation
C
Hinged Wall Bracket
The wall bracket includes a sturdy hinge that allows the cabinet to swing
away from the wall for convenient rear access to equipment and cabling.
You can reverse the swing direction by rotating the unit 180° before
installation. The wall bracket locks for secure access.
D
Perforated Side Panels (2)
Two removable side panels ease installation and service access. The side
panels are perforated for ample airflow and lock for secure access.
E
Cable Ports (2 or 4)
Ports allow cable routing through the top and bottom of the cabinet or
hinged wall bracket (if present). Removable covers block unused ports.

Specifications

Model
SRW6U SRW10US
6U
Rack Spaces
Front Door Metal
Hinged Wall Bracket No Yes
Standards TIA/EIA-310-D, IEC 60297-3-100, DIN 41494, IP20 Protection Rating, RoHS, UL 60950
* 200 lb
Load Rating
Mounting Depth 3 to 16.5 in. 3 to 20.5 in.
Mounting Holes
Height 14.5 in. 21.5 in.
Width 23.63 in. 23.63 in.
Depth 17.5 in. 21.6 in.
Weight 29 lb
* Requires a stable mounting surface capable of bearing the full weight of the unit and installed equipment. Rolling applications require the optional SRCASTER accessory (not compatible with Wall-Mount Open Frame Racks).
A
B
Wall-Mount Rack Enclosures
SRW12US SRW12USG
10U 12U 12U
®
Metal Metal Plexiglas
Yes Yes
(Standard) (Standard) (Standard)
200 lb 200 lb 200 lb
3 to 20.5 in. 3 to 20.5 in.
Square
(Mounting hardware included.)
24.75 in. 25 in.
23.63 in. 23.63 in.
21.6 in. 21.6 in.
55 lb 60 lb 60 lb
F E
SRW12US
D C
F
Top/Bottom Vents (4)
Vents at the top and bottom help remove warm air and draw in cool air.
Mounting holes accommodate user-supplied fans for increased airflow.
G
Heavy-Duty Rolling Casters (Optional)
. An optional Rolling Caster Kit (SRCASTER)
adapts Wall-Mount Rack Enclosures to mobile
and floor-standing
installation under a desk, table or counter.
H
Wall Brackets
The sturdy A-frame wall brackets allow the mounting frame to pivot.
I
Rotating Equipment Mounting Frame
You can rotate the mounting frame left or right for easy access to
equipment and cabling. Threaded holes support standard 2-post mounting.
J
Locking, Adjustable Pivot
Unlock the pivot to rotate the mounting frame, lock it in the standard
position or lock it open 90° (left or right) for service access.
Grounding (Not Shown)
Parts are grounded to the frame, which connects to facility ground.
(4-Post Mounting)
SRW12US33 SRW18US SRW26US
12U 18U 26U
Metal Metal Metal
Yes Yes Yes
(Heavy-Duty) (Heavy-Duty) (Heavy-Duty)
250 lb 250 lb 250 lb
3 to 32.5 in. 3 to 20.5 in. 3 to 20.5 in.
25 in. 35.75 in. 49.75 in.
23.63 in. 23.63 in. 23.63 in.
33.5 in. 21.6 in. 21.6 in.
100 lb 96 lb 125 lb
H
H
J
G
applications, including
Wall-Mount Open Frame Racks
(2-Post Mounting)
N060-002 N060-004 SRWO8U22
2U 4U 8U, 12U or 22U
None None None
Front Hinge Front Hinge No
TIA/EIA-310-D, IEC 60297-3-100, DIN 41494, RoHS, UL 60950
17 lb 35 lb 150 lb
5.5 in. 5.5 in. 18 in.
Round
(Mounting hardware included.)
3.5 in. 7 in. 18 to 42.5 in.
19 in. 19 in. 20 in.
6 in. 6 in. 18.25 in.
2.5 lb 5 lb 10 to 14 lb
I
SRWO12US
Caster
SRWO12US
12U
None
Pivoting Frame
150 lb
18 in.
30.5 in.
19.75 in.
20.5 in.
15 lb
9