Panasonic KX-TG6481? Operating Instrctions page 21

TG6481E(e).book Page 21 Thursday, May 7, 2009 1:36 PM
Top-menu Sub-menu 1
*1
Base Unit Setup Ringer Volume
<Medium>
Privacy Mode
<Off>
Recall/Flash
<100 msec.>
Base Unit PIN
<0000>
Repeater Mode
<Off>
*1
Caller Barred
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select "Caller ID[Auto]". To turn this feature off, select
"Manual". (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*3 When the ringer volume is turned off, ~ is displayed and the handset does not ring
for outside calls.
However even when the ringer volume is set to off, the handset rings:
– at the low level for alarm (page 22) and intercom calls (page 34)
– at the high level for paging (page 34)
*4 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*6 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*7 If you subscribe to a Caller ID service and want to view the caller's information
after lifting up the handset to answer a call, turn off this feature.
*8 To prevent other users from joining your conversations with outside callers, turn
this feature on.
*9 The recall/flash time depends on your telephone exchange or host PBX. Contact
your PBX supplier if necessary.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Sub-menu 2
–
*8
–
*9
–
–
–
– –
Programming
Page
–
–
17
22
24
22
21