Unit Installation - Boss Audio Systems BVI9994 User Manual

UNIT INSTALLATION

INSTALLATION INSTRUCTIONS
METAL STRAP
THE UNIT IS INSTALLED TO BE AN ANTI-THEFT ONE. THE CHASSIS
OF THE UNIT WEARS A SLIDING METAL HOUSING. PLEASE DO THE
CONNECTION OF THE POWER, SPEAKERS AND ANTENNA ACCORDING
TO THE REQUIREMENT OF THE INSTRUCTION BOOK , THEN INSTALL
THE SLIDING METAL HOUSING IN THE CAR AS FOLLOWS.
TO BOOST UP THE CAPABILITY OF
ANTI-JAMMING, PLEASE FIX THE
METAL STRAP ON THE METAL
CONNECTED TO THE BOTTOM
BRACKET OF THE CAR.
DASH BOARD
SLIDING METAL HOUSING
FRONT PANEL
TO DRAW THE CHASSIS OUT OF
THE SLIDING METAL HOUSING,
INSERT THE LEFT AND RIGHT KEY
PLATES INTO THE RIGHT POSITION
OF THE 2 SIDES OF CHASSIS.
UNIT CHASSIS
-4-
SELECT THE PROPER TAB
FOR FIXING THE SLIDING
METAL HOUSING.
PLASTIC TRIM OUT