Table of Contents
Advertisement
6. BLUETOOTH HANDFREE SYSTEM(Option)
1. Pairing and connection
1) Turn on the Bluetooth mode of the mobile phone;
2) Select the item of Finding the BLUETOOTH Device and press enter. Once the device
and unit are paired, the unit will display the name of the device. Select the device and
press enter, and the unit will ask for a password which is 0000. After entering 0000,
press enter and after the pairing is complete the unit will display "Pairing is OK".
3) For some mobile phones, they can automatically connect with the BT device of the
car audio system after pairing is ok; for some mobile phones, they need to select the
paired BT device and press the CONNECTION button . When connection is ok, the
LCD of the car audio system will show LINK OK.
* when pairing is failed, long press the MODE button on the front panel or PAIR button
on the remote control to enter pairing mode, then the LCD will display PAIR STAR,
then pair and connect with mobile phone again.
*
In Disc mode, press and hold the PAIR button for 3 seconds to enter Pairing mode.
2.
Using the mobile phone for connecting and disconnecting.
In the connection status, find the paired and connected Bluetooth Device, then press
the disconnection button to disconnect.
In the disconnection status, find the paired and disconnected Bluetooth Device, then
press the connection button to connect.
3. In the connection status: Mobile phone transfers to the car audio whenever a dialling
takes place; Mobile phone transfers to the car audio whenever receiving a call.
4. Dialling when in connection status
4.1 Dial with the mobile phone directly.
4.2 Dial with remote control with the following procedures:
(1) Short press TEL button, then a line will appear on LCD.
(2) Input telephone number with number buttons 0-9
* Short press CLEAR button to cancel the wrongly input number if necessary
(3) Short press TEL to execute the dialling.
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
1.6 Description of the Face of the Front Panel
10
1
8
9
12
13
14
6
23
3.2" TFT
20
15
17
22
21
16
The figure of the front panel
24
2
The figure of the Unit Chassis Facet After removing the Front Panel
1. POWER/MUTE BUTTON
13. 2/INT BUTTON
2. DISC SLOT
14. 3/RPT BUTTON
3. RELEASE BUTTON
15. 4/RDM BUTTON
4. MODE
16. 5/-10 BUTTON
5. AV IN SOCKET
17. 6/+10 BUTTON
6. SEL BUTTON
18. USB SOCKET
AND VOL KNOB
19. RESET BUTTON
7. SMALL MONITOR
20. APS/HANG UP BUTTON
8. IR REMOTE SENSOR
21. EQ BUTTON
9. BAND/TEL BUTTON
22. CLK BUTTON
10. UP AND DN BUTTONS
23. MICROPHONE
11. EJECT BUTTON
24. CARD SLOT
12. 1/PLAY/PAUSE BUTTON
25. LED Indicator
3
7
18
5
4
19 25
11
Advertisement
Table of Contents
