Table of Contents
Advertisement
During slow forward, press the PLAY button to resume normal playback.
This function is only for video.
5
.3 Playback with still frame
If the unit is currently playing DVD/VCD disc, press the STEP button
consecutively to display the still frame forward with step by step.
Press the PLAY button to resume normal playback.
5
.4 Playback Repeatedly
5
.4.1 ONE/ALL Repeat
1.
In the mode of DVD disc playback:
Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL
or REP OFF.
2.
In the mode of VCD(PBC OFF)/CD disc playback:
press the RPT button to select REP ONE, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT
button are not available.
3.
In the mode of MP3/WMA disc playback:
Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.
5
.4.2 A-B Repeat
Press the
A-B
button if you want to repeat a specific segment on a disc
that you define:
1.
Press the
A-B
button at a point (A) where you want it to be the start point
of the repeat segment. Press the
want it to be the terminal point of the repeat segment. Then it will play the
segment repeatedly.
2.
To cancel the A-B repeat mode and resume normal playback, press the
button for the third time.
Note:
During VCD/MP3/WMA/CD playback, points A and B must be within the
same track.
During DVD playback, points A and B can be selected from different chapters.
PDF created with FinePrint pdfFactory trial version
A-B
button again at a point (B) where you
http://www.pdffactory.com
5.5 Playback in Scan Mode
1. When playing a VCD(PBC OFF)/CD disc, press the INT button to play the
previous 15 seconds part of each track on the disc. Press the INT button
again to resume normal playback.
2. When playing a DVD/MP3/WMA disc, the INT button is not available.
5.6 Playback from a specified chapter/track or a specified time
1. When playing a DVD disc , press the SEARCH button to display a interface
and highlight the title item, then use the number buttons to input the serial
number of the title; use the direction buttons to highlight the chapter item,
then use the number buttons to input the serial number of the chapter; you
can still use the direction buttons to highlight the time item, then use the
number buttons to input the desired time to start playback; finally press the
OK or PLAY button to play the selected chapter or play from the selected
time.
2. When playing a VCD/MP3/WMA/CD disc , press the SEARCH button to
display a interface and highlight the track item, then use the number buttons
to input the serial number of the track; you can still use the direction buttons
to highlight the time item, then use the number buttons to input the desired
time to start playback; finally press the OK or PLAY button to play the selected
track or play from the selected time.
5.7 Playback in Random
When playing DVD/VCD(PBC OFF)/MP3/WMA/CD disc , press the RDM
button to switch between RANDOM (ON)/RANDOM OFF. When in RANDOM
(ON) mode, it will play in random.
5
.8 Playback in Different Angle
1. When playing a VCD/MP3/WMA/CD disc , the ANGLE button on the remote
control is not available.
2. When playing a DVD disc , press the ANGLE button repeatedly on the
A-B
remote control to view in different angle.(This function is only for the DVD
discs with ANGLE function)
5
.9 Playback in Zoom Mode
In DVD/VCD mode, during playback, press the ZOOM button continuously
to enlarge a certain area of the images on the screen with these multiples:
Advertisement
Table of Contents
