Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Boss Audio Systems BV7945B
Summary of Contents for Boss Audio Systems BV7945B
- Page 1 10 R - 02 1011...
- Page 2 WARNINGS When Driving USE OF CONTROLS OR ADJUSTMENTS OR Keep the volume level Iow enough to aware of PERFORMANCE OR PROCEDURES OTHER the road and traffic conditions. THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION CAUTION EXPOSURE. In some countries, it's unlawful to operate a DO NOT OPEN COVERS AND DO NOT vehicle while video is displayed in the REPAIR BY YOURSELF PLEASE REFER...
-
Page 3: Disc And Format Supports
DISC AND FORMAT SUPPORTS Unsupported Discs This unit can play various video/audio format which stored into Disc/USB or SD card on 8 cm Disc Media Player. CDV , CDI, CDG, The following chart helps you to check if a MultiMedia RAM disc is supported by this unit, as well as what functions are available for a given disc type. -
Page 4: Removing The Unit
INSTALLATION The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your customer car audio dealer or a company suppling kits. If you are not sure how to install this unit correctly, have it installed by a qualified technician. To attach the front panel back to the unit Trim Plate chassis, firstly join the right guide block... -
Page 5: Connecting The System
CONNECTING THE SYSTEM About Parking Wire About The Reverse Wire For Back Up Camera System CAUTION If user connected a back up camera system In order to avoid any accident, the driver must to this unit, when the vehicle is in reverse not watch video while driving. -
Page 6: Wiring Diagram
CONNECTING THE SYSTEM Wiring Diagram ANTENNA ANTENNA EXTENDER JACK CABLE BLACK FRONT LINE OUT WHITE RCA-TO-RCA CABLE (not supplied) BLACK SUB-W OUT REAR BACK UP CAMERA IN OR VIDEO IN YELLOW VIDEO IN ISO CONNECTO SOCKET VCR or MultiMedia AUDIO IN (RIGHT) (See Figure 1) AUDIO IN R GAME CONSOLE... - Page 7 THE FUNCTIONS OF MAIN UNIT Decriptions Item Press this button to open the control panel. (RELEASE) MENU Press this button to access into the SystemMenu mode. INFO Under RDS mode, press repeatedly to view RDS received information. Under MultiMedia playback mode, press repeatedly to view play information: Title--->Chapter--->Play time ENCODER Rotate the Encoder Volume Knob to increase and decrease the...
- Page 8 THE FUNCTIONS OF MAIN UNIT CLOCK Press this button to view the Clock, press this button again to return to previous mode. Under the Bluetooth Handfree mode, short press this button DIAL to answer an incoming call. Under the Bluetooth Handfree mode, long press this button to enter into call Tansfer back to Mobile Phone.
- Page 9 THE FUNCTIONS OF REMOTE CONTROL Decriptions No. Button Item POWER ON Press this button to turn On / Off the unit. Press this button to turn the Mute On / Off. MUTE Hold & press this button to enter into the System Menu mode. SYSTEM MENU SOURCE Press this button to enter into the SOURCE mode.
- Page 10 THE FUNCTIONS OF REMOTE CONTROL Under the tuner mode, press this button access Auto Seek mode. Under the media playback mode, press this button to skip backward of the previous chapter. Under the tuner mode, press this button access Auto Seek mode. Under the media playback mode, press this button to skip forward of the next chapter.
-
Page 11: Beep Tone
ADJUST SETTINGS Press the MENU/INFO button access into the Adjust System Setting System Menu. User can rotate the Encoder Volume Knob to select the below options, User can rotate the Encoder Volume Knob to then press Power/Mute to confirm. select the System Settings, then press Power/Mute to confirm. -
Page 12: Tuner Operations
TUNER OPERATIONS Tune To Radio Station Adjust Tuner Function Press the FUNC button under Tuner mode Press the BAND button to change between FM access into the Tuner Function menu. User can bands and AM(MW) bands. rotate the Encoder Volume Knob to select the below options: Tune To Preset Station Press the LIST button to get into the preset... -
Page 13: About Rds
ABOUT RDS AF (Alternate Frequencies) NOTE If the radio signal come from the current station This unit default at USA Tuner Area. RDS is poor, you can turn on the AF (Alternate function only activated after selected the Frequency) function to let the unit searches for Tuner Area to “... -
Page 14: Usb Device Operation
MEDIA PLAYER OPERATIONS (Disc/USB/SD Card) This unit can play various video / audio stored Memory Card Operation into Disc / USB or SD Card on media player. Insert The Memory Card You can play commercially available audio CDs and these Discs: Press on the front panel to release the Digital Versatile Discs (MultiMedias) -
Page 15: Video Setting
MEDIA PLAYER OPERATIONS (Disc/USB/SD Card) Video Setting Skip/Search MultiMedia Under /VCD playback, press the Under the Media playback, press the LIST FUNC button access into the Video Setting button access into the playlist menu. User mode,the below Setup menu will appear: can rotate the Encoder Volume Knob to select the below options: [BRIGHT]: change the Bright level from 0... - Page 16 AV-In Mode AV - 2 In Select the AV Mode Connect the external signal to the RCA line in Your can connect up to 1 AV device, press the jack located at the rear of the unit , then press SOURCE button to enter into the AV mode: SOURCE button to select AV -2 In.
-
Page 17: Bluetooth Operations
BLUETOOTH OPERATIONS 10. To ensure the best conversation quality / User Guide For Bluetooth performance, talk within 1 meter of the 1. When using this Bluetooth HEAD UNIT, Head Unit. please make sure the mobile phone you use 11. If the user wants to Dis-connect the Head supports Bluetooth functions (Headset or unit with the Mobile Phone, please switch Handsfree profiles or both). - Page 18 BLUETOOTH OPERATIONS Q: Under Phone conversation, the “ Listener Name of Buttons and Their Functions can hear echo feedback. A: Your unit's speaker volume level is too loud which causes the voice feedback into the microphone. This can be corrected by decreasing the volume level.
- Page 19 BLUETOOTH OPERATIONS Handsfree Operation User can use the Encoder Volume Knob to adjust the volume level. Pairing The Bluetooth System To end the conversation, press the “ ” Between Mobile Phone & The Unit button. The unit will switch back to the previous mode automatically and release the Open your Mobile Phone and switch mute of the previous mode at the same time.
-
Page 20: Call Transfer
BLUETOOTH OPERATIONS Call Transfer During the talking mode, user can long press the “ ” button to transfer the audio from the unit back to the Mobile Phone for privacy reason. NOTE After the “ ” button is pressed, the present mode will be muted at the same time, user can press the button to release the Mute. -
Page 21: Bluetooth Audio Operation
BLUETOOTH OPERATIONS Listening To Music From An Audio Bluetooth Audio Operation Device In This Unit 1. Connect this unit with the audio device. User can listen to music files on an audio device on this unit if the audio device NOTE supports A2DP (Advanced Audio Distribution Profile) of Bluetooth Technology. - Page 22 BLUETOOTH OPERATIONS Operating an audio device with this NOTE unit AVRCP ( Audio Video Remote The AVRCP operation may differ depending Control Profile ) on the audio device. This unit can perform the following operations w h e n t h e c o n n e c t i n g A u d i o d e v i c e Handsfree Phoning While Bluetooth supports AVRCP (Audio Video Remote Control Audio Streaming...
-
Page 23: Specifications
SPECIFICATIONS TFT Screen Section Screen Size: 3.6"(Measured Diagonally) Screen Type: TFT Liquid Crystal Display active matrix Resolution: 320 x 240 MultiMedia / CD Section Compatible Disc/Format See “ Disc Note” for more details description Signal to Noise Ratio > 90 dB Dynamic Range >... -
Page 24: Troubleshooting
TROUBLESHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution The car ignition is not on. If the power supply is properly connected to No power the car accessory terminal, switch the ignition key to “ACC”...