Burn Firmware
NOTES:
Use one of the below methods to burn the firmware file to a CD-R disc.
Use the ISO-9660 file system without using Joliet.
4.1
3)
Windows
OS CD Writing Program
®
1)
Insert a blank CD-R disc into a CD Burner Drive installed in
or attached to the computer.
2)
If the below (or similar) screen appears (Windows XP), left
click on CANCEL.
Right click on the
PANA_DVD.FRM
mouse over
SEND
TO, and then left click on the
BURNER
DRIVE.
NOTE: If the below screen appears, left click on YES.
NOTE: The below screen may appear momentarily.
file on the DESKTOP,
CD