Resetting Factory Settings - Denon AVR-X1000 Owner's Manual

Contents

Resetting factory settings

Perform this procedure if the display is abnormal or if operations cannot be performed.
Note that when the microprocessor is reset, all the settings are reset to their default values and setup will need to be performed again.
X TUNER PRESET CH –
TUNER PRESET CH +
Front panel Display
Connections Playback
Rear panel
Settings
1
Turn off the power using X.
2
Press X while simultaneously pressing TUNER PRESET
CH – and TUNER PRESET CH +.
3
Once the display starts flashing at intervals of about 1
second, release the two buttons.
%
• If in step 3 the display does not flash at intervals of about 1 second, start over
from step 1.
175
Remote
Tips Appendix
Index