Philips LFH9120 User Manual page 7

Usb docking station
Hide thumbs Also See for LFH9120:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
D Note
The Digital Pocket Memo can become warm
during fast recharging.
E Tip
If your Digital Pocket Memo supports fast
recharging through the USB cable, you do not
need to use the power supply. The connected
PC must support the USB specification (500mA)
and needs to be on during the charging process.
5.3
Transfer dictation files to a PC
Philips SpeechExec
1
application of your system integrator must
be running on the PC.
Make sure that the docking station is
2
connected to the PC with the USB cable.
Switch on the Digital Pocket Memo by
3
moving the On/Off switch to the
position.
Insert the Digital Pocket Memo into the
4
docking slot of the docking station and press
it down firmly until it locks.
Depending on the device and software
5
settings, the file transfer either starts
automatically (to a pre-defined destination
path), or must be activated through
SpeechExec
or the software application of
your system integrator.
When the files have successfully transferred,
6
the Digital Pocket Memo will indicate to
that it is OK to disconnect, and you can
remove the Digital Pocket Memo from the
docking station.
User manual
or the software
ON
Philips
Important
C
Do not remove or switch off the Digital Pocket
Memo while the file transfer is in progress,
otherwise your dictation files may be damaged.
D Note
See the Digital Pocket Memo User Manual for
detailed information on operating the Digital
Pocket Memo.
7

Advertisement

Table of Contents
loading

Table of Contents