Connecting the IR control cable Connecting a display device Connecting an audio system Setting up the software Chapter Two: Getting Started Checking out your Gateway Family Media Center Front Back (Gateway FMC-901 Media Center) Back (Gateway FMC-901X Media Center) Learning about the remote...
Page 4
Learning about the wireless mouse Table of Contents Using the wireless mouse Fine-tuning the wireless mouse pointer control Changing the wireless keyboard or mouse channels Determining the wireless keyboard or mouse channels Turning the wireless keyboard or mouse power on or off Learning about the wireless keyboard Starting the Windows XP Media Center Using the Windows XP Media Center...
Page 5
Adding music CDs to the Media Library Table of Contents Playing My Music Chapter Five: Using My Pictures Getting started with My Pictures Organizing picture files Viewing My Pictures Using More Info Playing audio during a slide show Chapter Six: Using My Videos Getting started with My Videos Organizing video files Viewing My Videos...
Page 6
Chapter Ten: Getting Help Media Center FAQs Wireless keyboard and mouse troubleshooting Getting more help Using Help and Support Other Family Media Center resources Documentation Windows Update Web site Contacting Gateway Appendix A: Safety, Regulatory, and Legal Information...
About your Family Media Center The Family Media Center provides rich entertainment and powerful computing capabilities. You can run the Windows XP Media Center while using other programs or just enjoy the Windows XP Media Center in full-screen mode without using other programs.
Planning your Family Media Center setup Locating connections You’ve probably already decided where you want to locate your Family Media Center, but before you start setting up the Media Center, take a few minutes to make sure that all of these connections are available in the location you’ve selected.
Connections overview Your Family Media Center accepts a variety of audio and video inputs and it can output audio and video to a number of audio and video devices. This is a sample setup diagram of a Media Center configuration. The possible audio and video input connections to your Family Media Center and the audio and video output connections from the Media Center are shown.
Page 11
Connect to a display device using: • DVI-D Out jack • S-Video Out jack • VGA Out port Connect to your Family Media Center using: • Cable set-top box (S-Video, composite, or coaxial connection) • Satellite receiver set-top box (S-Video, composite, or coaxial connection) •...
Setting up the hardware Gateway FMC-901 Media Center Gateway FMC-901X Media Center Connect the modem or broadband Internet (optional) Connect the audio/video source A coaxial (TV in) connection carries both the audio and video signals. If you use an S-Video...
Page 13
Install the mouse, keyboard, and remote batteries. For more information, see “To install and charge the mouse battery pack” on page 8. Plug in your Media Center For more information, see “To install the keyboard batteries” on page 9. Turn on your Media Center Press the power button on the front of your Family Media Center.
Setting up and synchronizing the wireless keyboard and mouse Before using the wireless mouse and keyboard, install the batteries into both devices, connect the power adapter to the mouse charging cradle, charge the mouse for 9 hours before using, and synchronize the mouse and keyboard with the radio frequency (RF) receiver on your Family Media Center.
Page 15
Tip: The keyboard cover may be attached to the back of the keyboard when you receive it. Remove the keyboard cover from the back of the keyboard, as shown below, to access the battery compartment cover. To protect the keyboard when not in use, you can place the keyboard cover over the keyboard keys.
Page 16
Tip: When synchronizing the wireless keyboard and mouse, make sure that you synchronize (teach) both the keyboard and mouse during the same Learning mode session. If you synchronize one wireless device and later enter the Learn mode to synchronize the other wireless device, the Learn mode erases all previous learned settings from memory and looks for new devices.
Page 17
Press and release the Teach button located on the bottom of the mouse. The Status light on the Family Media Center’s front panel blinks rapidly for four seconds, then begins blinking slowly. Press and release the Teach button on the top left corner of the wireless keyboard.
Connecting the audio and video source Your Family Media Center has connectors for coaxial (TV), S-Video, or composite video. Select the connector that your video source supports: • Coaxial (TV) — The video and audio signals are both carried on one cable. The coaxial cable is the way to connect a direct cable or an antenna video source to your Media Center.
Page 19
To connect S-Video or composite video Connect an S-Video or composite video cable from a video source (such as a cable set-top box, a satellite set-top box, or other video device) to the S-Video In or Composite Video In port on the back of your Family Media Center. - OR - Connect an RCA cable (not included) from the Audio Out jacks on the video device to the Audio...
Connecting the IR control cable If your Family Media Center configuration uses a set-top box for the Media Center video source, connect the infrared (IR) control cable from the Family Media Center to the set-top box IR sensor window. The IR control cable sends input from the remote sensor to your set-top box to change channels.
Gateway sales representative to help you select a display device that is optimized for your Media Center. See “Contacting Gateway” on page 96 for Gateway contact information. Tip: Many TVs use interlaced video. Interlaced video displays a video frame with two passes of alternating scan lines.
Page 22
To connect a display device Connect a VGA cable (not included), S-Video cable, or DVI cable (not included) to the VGA port, S-Video port, or DVI port on the back of your Family Media Center. Connect the other end of the cable to the VGA port, S-Video port, or DVI port on the back of your TV.
(S/PDIF). • Toslink digital cable to connect your Family Media Center to digital audio inputs (S/PDIF). Gateway FMC-901 Media Center Connect rear left and right analog speakers with 1/8" stereo to RCA plug Y-cables Connect front left and right analog speakers with 1/8"...
Page 24
Click OK to save your speaker setup. Tip: If you have a Gateway FMC-901 Family Media Center model, you can also configure audio inputs with the SigmaTel audio Speaker Wizard and SigmaTel Universal Jacks dialog box. Click Start, All...
Setting up the software Complete the Windows XP setup After you’ve turned on your Family Media Center, wait for it to start up, then follow the on-screen instructions. Complete external devices setup Connect devices, such as a printer or scanner, after you complete the Windows setup.
• Learn about your Gateway 901 Series Family Media Center • Learn about the remote • Learn about the wireless keyboard and mouse • Start the Windows XP Media Center • Use your Family Media Center ChapterTwo GettingStarted...
Checking out your Family Media Center Front 10 11 12 13 14 15 17 Item Component Icon Power button Hard drive / card reader indicator Status display (FMC-901) DVD/CD-RW combo drive (FMC-901X) DVD RAM/-R/CDRW 18 19 Description Press to turn the power on. Press to put the Family Media Center in Standby mode or resume from Standby mode.
Page 29
Item Component Icon Description DVD/CD drive eject Press to open the CD/DVD tray. button Four-way scroll Press the up button OK button Press to make menu selections. Home Press to navigate to the browser’s default home page. Back Press to navigate to the previous browser page. S-Video In port Plug an S-Video cable from a video source, such as a camcorder or VCR into this port.
Page 30
Item Component Icon SmartMedia CompactFlash SecureDigital Memory Stick Memory Stick Pro MS Pro MultiMedia Card Volume + / - button Channel + / - button My TV button DVD Menu button My Music button My Pictures button My Videos button Radio button Stop button Play button...
Description Plug 10/100 Ethernet network cable into this jack. For more information about networking, see the Networking Your Computer guide. Click Start, All Programs, Gateway Documentation, then click the networking guide. Plug powered, analog rear speakers or an external amplifi er into this jack. Use a 1/8”...
Page 32
Item Component TV In jack (coaxial) Power connector IR Control port Digital Audio In (S/PDIF) jack Digital Audio Out (S/PDIF) jack IEEE 1394 port USB ports (2) Subwoofer/Center Analog Audio Out jack (line out) Front left and right Analog Audio Out jack (line out) AUX (audio input jack) VGA Out (monitor port) To Wall (modem In jack)
Description Plug 10/100 Ethernet network cable into this jack. For more information about networking, see the “Networking Your Computer” guide. Click Start, All Programs, Gateway Documentation, then click the networking guide. Plug a video device, such as a monitor or camcorder, that support S-Video into this port.
Page 34
Item Component Digital Out jack (line out) (Yellow jack) Line in (Analog In jack) (Blue jack) FM In antenna (external coaxial connector) TV In jack (coaxial) S-Video In port Video In port (RCA) Audio In jack (left channel) Power connector IR Control port Digital Audio In (S/PDIF) jack Digital Audio Out (S/PDIF) jack...
Page 35
Item Component DVI-D Out jack To Wall (modem In jack) Rear left and right Analog Audio Out jack (Black port) Subwoofer/Center Analog Audio Out jack (Orange port) IEEE 1394 port Audio In jack (right channel) Icon Description Plug a digial DVI-D display device, such as plasma display, into this port. Plug an RJ-11 modem cable into this jack.
Learning about the remote Transport buttons let you replay recorded (buffered) TV and radio programs and play the CD and DVD player. Media Center Start button starts the Media Center software. Audio/Video (A/V) control buttons control volume levels, volume mute, channel selections, and the DVD menu.
Using the remote Use the Media Center remote to watch TV, videos, and DVDs, to listen to music, and to view pictures. Use the remote navigation buttons to highlight a Windows XP Media Center menu option, then press the OK button to select the menu option. Press one of the menu shortcut buttons on the remote for direct access to a Windows XP Media Center menu.
Learning about the wireless mouse Status LED indicator indicates mouse status. See “Media Center FAQs” on page 88. Scroll wheel and button use to move vertically through a document or program. Left/Right select buttons use to select objects and menus on the screen. Battery pack install rechargeable battery pack Activation trigger...
Using the wireless mouse The wireless mouse gives you flexibility to control your Family Media Center. The mouse provides precise tracking on most surfaces. You can also use the mouse in the air to point and select on the screen. Tips: For optimal mouse performance, avoid using the mouse on highly reflective glass or mirrored surfaces.
Fine-tuning the wireless mouse pointer control While getting familiar with your wireless mouse and getting a feel for the “in air” method of pointer control, you may want to adjust the mouse settings. You can adjust the double-click speed, pointer speed, left-hand or right-hand configuration, and other mouse settings.
Determining the wireless keyboard or mouse channels The wireless keyboard and mouse have eight channels available to communicate on. Use the following instructions to determine the channel a device is currently using. To determine the wireless keyboard or mouse channel Press and quickly release the Channel button on the bottom of the wireless keyboard or mouse.
Learning about the wireless keyboard Use the keyboard to navigate and select the Windows XP Media Center menus and options and perform other activities such as typing an e-mail. For information about changing the wireless keyboard channels, see “Changing the wireless keyboard or mouse channels”...
Page 43
Item Component Status LED indicator Channel button Teach button Transport buttons Audio/Video (A/V) control buttons Internet and e-mail buttons Windows keys Application key Directional (navigation) keys Icon Description Status Indicates keyboard status. See “Media Center FAQs” on page 88. Use to change the radio frequency (RF) channel the keyboard uses. For more information, see “Changing the wireless keyboard or mouse channels”...
Starting the Windows XP Media Center You can take full control of the Family Media Center from your wireless keyboard, remote, and mouse. Use the device that is comfortable for you. To start Windows XP Media Center from the Start menu •...
Using the Windows XP Media Center You can switch to the Microsoft Windows desktop at any time. Windows XP Media Center will continue to run in the background. To switch between the Windows XP Media Center and the desktop • Click the minimize button to view the desktop.
Page 47
ChapterThree UsingMyTV • Watch Live TV • View the Guide and select TV programs • Schedule, record, and sort TV program recordings • Search for programs by categories, title, or keyword • Change My TV settings...
Watching TV You can control your TV viewing experience with My TV. Use My TV to watch TV, record TV, watch buffered (time-shifted) TV, watch recorded programs, search for programs, change TV settings, and more. While watching My TV or using the Guide, you can press the More Info button on the remote to view more information about the selected program.
Using the remote to play TV recordings My TV automatically records TV programs to a program buffer as you watch TV. When you stop or pause live TV programs, My TV continues recording (buffering) the program for up to 30 minutes so you can watch the program where you previously left off.
Page 50
Tip: To change the display’s aspect ratio with the remote, press the More Info button, then press Zoom. To rewind and replay a buffered TV program • On the remote, press the Rew locate the point in the TV program that you want to replay, then press the Play button.
Using the Guide The Guide displays channel and TV program information, TV program titles, descriptions, categories, ratings, and program times. You can view and scroll through the list of current and future TV shows in the Guide. When you select a program title, information about the program displays below the program listings.
Manually updating the Guide When you use the Windows XP Media Center setup wizard, you can set up the Guide to automatically download program information from your cable or satellite service provider. However, if your Internet Service Provider does not support automatic Guide updates or if the Guide needs to be updated for another reason, you may need to update the Guide manually to refresh the program listings.
Recording TV programs Your Family Media Center lets you record the program you are watching, record a program that is scheduled to broadcast later, or record a recurring program series. To record the program you are watching Use the CH/PG + or CH/PG – buttons, numeric keypad, or the Guide to choose programs that you want to record.
Page 54
Tip: When you schedule to record a program series, the Windows XP Media Center records each series episode from any channel that broadcasts the program series. Windows XP Media Center will not record duplicate programs from the series and it will look for alternative broadcasts times if a recording time conflict occurs.
Using Recorded TV Use Recorded TV to view and manage your program recordings. After you have recorded TV programs, go to Recorded TV to sort programs by date, name, and category. You can also schedule new program recordings and watch and manage scheduled program recordings. To watch and manage Recorded TV On the remote, press the My TV button.
Changing My TV Settings Use My TV Settings to customize the Windows XP Media Center My TV. You can adjust settings for the TV recorder, Guide, TV signal, display settings, audio, and My TV. To use the Settings menu On the remote, press the My TV button. The Windows XP Media Center starts.
The Media Center minimizes and Sonic PrimeTime opens. Tip: If your Gateway 901 Series Media Center does not include a recordable DVD drive but includes a recordable CD drive, you can change the recording device option to Video CD (VCD) and record TV programs to a CD.
Page 58
After you have selected the TV programs you want to record, highlight Burn DVD, then press the OK button. A message tells you that running additional programs while burning a DVD may cause the recording to fail. If you have a number of programs running, close the programs, then click OK.
UsingMy Music • Browse music selections • Search for music by titles and keywords • Play music • Add songs and audio files to the Media Library • View music CD information such as artist name, song title, album cover art, and more ChapterFour...
Getting started with My Music My Music lets you enjoy a complete music experience from the Windows XP Media Center. You can listen to CDs, view artist information, create your own music playlists, categorize and listen to music by genres, search for music selections, and more.
If this is the first time you’ve added music files to the Media Library, click Yes. The Media Player searches for all music files on your Family Media Center and adds them to the Media Library. - OR - If you want to add new music files to the Media Library, click the show menu bar arrow display the menu bar, click Tools, then click Search for Media Files.
Page 62
On the left side of the Media Player, click Copy from CD, then click Copy Music. The Copy Options (1 of 2) dialog box opens. Click Add copy protection to your music or Do not add copy protections to your music, then click to select the check box next to the copyright statement.
Playing My Music You can play music CDs with Windows XP Media Center’s My Music. After you’ve added your CD collection to the Media Player’s Media Library, you’ll have a variety of music to listen to directly from your Family Media Center. You can play individual songs, CDs (albums), shuffle play, and customize your music files for special occasions with a personalized music playlist.
Page 64
You can also: • Select View Song to view the CD cover artwork and the currently playing song’s title. • Select View Tracks to view a list of all the tracks on the CD. • Select Shuffle to randomly arrange the music play selections.
Page 65
You can: • Select Albums to play music, from your Media Library. • Select Artists to view and play music from a list of all artists in your Media Library. • Select Playlists to view and play music from your custom playlists or from auto-created playlists.
Page 66
To set Windows XP Media Center as the default CD player With the mouse, click Start, then click My Computer. The My Computer window opens. Right click the Audio CD (D:) drive, then click Properties. The Audio CD (D:) Properties dialog box opens.
Manage and add pictures to • your photo library • Browse and search for pictures • View and touch up pictures • Print and share pictures • Watch pictures as slide shows • View picture details such as file name, file date, picture pixel size, where the picture is stored, and more ChapterFive...
Getting started with My Pictures The Windows XP Media Center’s My Pictures makes it easy and fun to look at your digital photos. My Pictures lets you view your pictures individually or as a slide show. You can organize and sort pictures by name or date.
Organizing picture files To view pictures and play slide shows in the Windows XP Media Center’s My Pictures, first copy and organize the picture files into the My Pictures or Shared Pictures To organize picture files With the mouse, click Start, then click My Pictures.
Viewing My Pictures After you’ve organized your picture files in the My Pictures or Shared Pictures folder, then you can view pictures in the Windows XP Media Center’s My Pictures. To view pictures from the Windows XP Media Center On the remote, press the My Pictures button. The My Pictures menu opens and the picture folders display.
You can view individual pictures by highlighting a picture and pressing the OK button. You can also choose from the menu options: • Select Play slide show to view the pictures in a slide show. The slide show automatically transitions between pictures. You can also press the left and right remote navigation buttons to view the pictures manually at...
Choose from the menu options: • Select Play slide show to view the pictures in a slide show. The slide show automatically transitions between pictures. You can also press the left and right remote navigation buttons to view the pictures manually at your own pace.
• Manage and add videos to your video library • Browse and search for videos • View videos • Share videos • View video details such as file name, file date, picture pixel size, where the picture is stored, and more ChapterSix UsingMy Videos...
Getting started with My Videos The Windows XP Media Center’s My Videos makes it easy to enjoy your digital videos. My Videos lets you watch and share your videos. You can organize and sort videos by name or date. Use the keyboard, mouse, or remote to browse your videos.
Organizing video files To view videos in the Windows XP Media Center’s My Videos, first copy and organize the video files into the My Videos or Shared Video folders. The Windows XP Media To organize video files With the mouse, click Start, My Documents, then click My Videos.
Viewing My Videos After you’ve organized your video files in the My Videos or Shared Videos folder, you can view videos in the Windows XP Media Center’s My Videos. The video clips To view videos from the Windows XP Media Center On the remote, press the My Videos button.
Using More Info While viewing videos, you can press the More Info button to view information about the video (if available) and change the video display’s aspect ratio. To use More Info for videos On the remote, while viewing videos, press the More Info button.
Playing a DVD You can watch a DVD with the Windows XP Media Center. If the Windows XP Media Center is running when you insert a DVD into the DVD drive, a message asks if you want to play the DVD. If you select Yes or do not make a selection, the DVD plays automatically.
Page 81
To select DVD menu options Press the DVD menu button. The DVD menu opens. - OR - Press the Stop button. The Stopped DVD menu opens. On the remote, highlight the menu option you want to select, such as language, subtitles, and others, then press the OK button.
UsingRadio • Play FM and Internet radio • Preset favorite radio stations • Rewind, pause, stop, skip forward, and play radio recordings ChapterEight...
Playing the Radio You can enjoy the Family Media Center’s FM radio and control playback with the remote. When you play the radio, the Window XP Media Center records (buffers) up to 30 minutes of the radio program much like My TV does.
Page 85
To manually-tune the FM radio with Tune On the remote, press the Radio button. The Radio window opens. With the remote, highlight Tune + or Tune –, then press the OK button repeatedly to manually scan for radio stations. When you tune a station, you can: •...
Using the remote to play Radio recordings When you play the radio, the Windows XP Media Center automatically records radio programs to a program buffer as you listen. When you stop or pause radio programs, the radio continues recording (buffering) the program for up to 30 minutes so you can listen to the broadcast Remote Press:...
Changing Radio Settings Use Radio Settings to customize the Windows XP Media Center Radio. You can change, remove, and reorder To use the Settings menu On the remote, press the Radio button. The Radio window opens. Navigate to Settings, then press the OK button. The Settings menu opens.
Changing Windows XP Media Center Settings You can access most of the Settings menus within a specific Windows XP Media Center feature, such as My TV, My Pictures, My Music, and others. However, you can also access all of the Settings menus from Settings on the Windows XP Media Center’s main menu.
Using More Programs More Programs gives you access to other programs and games available to use or play from the Windows XP Media Center. To use More Programs Press the Start button on the remote. The Media Center menu is displayed. Highlight More Programs, then press the OK button.
Using Online Spotlight The Windows XP Media Center Online Spotlight highlights new ways to enjoy and use your Family Media Center. Check the Online Spotlight regularly to learn more tips and tricks and to get the most out of your Family Media Center experience.
ChapterTen GettingHelp • Get answers to Frequently Asked Questions (FAQs) • Learn about the Windows XP Media Center online help and other information resources • Get Gateway contact information...
Media Center FAQs Following are Family Media Center Frequently Asked Questions (FAQs). To view other Media Center FAQs that are not covered in this section, go to the Gateway support Web Site at support.gateway.com/windowsxp/mediacenter/faqs/. Q: Why does the Family Media Center video display look...
Page 95
Family Media Center, the computer uses a screen resolution of 1024 x 768 for computer monitors and 800 x 600 for the Gateway 42-inch Plasma TV. Many TVs cannot display this high resolution and may shift, scramble, or scroll the picture.
Page 96
“Changing Windows XP Media Center Settings” on page 84. For more information, review the FAQ topic at: support.gateway.com/windowsxp/mediacenter/faqs/ Q: Can I burn TV programs that were recorded with my Family Media Center to a DVD-R disc? A: Yes. Windows XP Media Center saves recorded TV programs in the .DVR-MS format.
Wireless keyboard and mouse troubleshooting Symptom The Family Media Center does not Keyboard/mouse and receiver are not synchronized. recognize keyboard or mouse data input. Other radio frequency (RF) devices are interfering with the RF signal transmitted from the keyboard and mouse. The keyboard batteries are dead or the mouse battery pack is not charged or is no longer holding a charge.
Page 98
Symptom The mouse pointer moves too slow The mouse speed or acceleration is not set correctly. or too fast. The mouse pointer drifts on the The mouse sensor my require recalibration. screen. The mouse LED does not fl ash in The mouse has dirty contacts.
Getting more help The Windows XP Media Center is easy to use when you follow the on-screen menus. However, if you need additional help or information about using the Windows To open Windows XP Media Center Help In the Media Center window, move the mouse to activate the Windows XP Media Center tool bar.
Using Help and Support Your Family Media Center also includes Help and Support, an easily accessible collection of help information, troubleshooters, and automated support. To open Help and Support To start Help and Support, click Start, then click Help and Support. Help and Support opens. Use Help and Support to answer questions about Windows and to help you quickly discover and use the many features of your Family Media Center.
Web site You can get the latest FAQs, information, and tips and tricks about making the most of your Family Media Center experience. Go to the Microsoft Media Center Web site at microsoft.com/windowsxp/mediacenter/ the Gateway Support Web site at support.gateway.com/windowsxp/mediacenter/.
Gateway’s fee-based Get tutorial assistance for software issues software tutorial billed by the minute. service Gateway Technical Talk to a Gateway Technical Support Support representative about a non-tutorial technical support question. TDD Technical Support (for hearing impaired) is available: Weekdays 6:00 a.m. - 8:00 p.m. Central Time Weekends 6:00 a.m.
Page 103
Safety, Regulatory, and Legal Information AppendixA...
Important safety information Your Gateway system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.
Replacement parts and accessories Use only replacement parts and accessories recommended by Gateway. Important: Do not use Gateway products in areas classified as hazardous locations. Such areas include patient care areas of medical and dental facilities, oxygen-laden environments, or industrial facilities. Warning: To reduce the risk of fire, use only No.
Warning: Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact Gateway for service.
FCC rules. FCC declaration of conformity Responsible party: Gateway Companies, Inc. 610 Gateway Drive, North Sioux City, SD 57049 (605) 232-2000 Fax: (605) 232-2023 Product: 03-DT005-01 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following...
Page 108
Telecommunications per part 68 of the Code of Federal Regulations (CFR 47) (applicable to products fitted with USA modems) Your modem complies with Part 68 of the Code of Federal Regulations (CFR47) rules. On the computer or modem card is a label that contains the CFR 47 registration number and Ringer Equivalence Number (REN) for this device.
Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact Gateway for service. Warning: The transmitting device may not be used with any antenna other than the antenna provided with them.
Page 110
Unintentional emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté...
Page 111
Lightning protection For added protection of any Gateway product during a lightning storm or when it is left unattended or unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system.
Laser safety statement All Gateway systems equipped with CD and DVD drives comply with the appropriate safety standards, including IEC 825. The laser devices in these components are classified as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Performance Standard.
Page 113
Gateway is not responsible for inaccurate information which may appear in this manual. For the latest product updates, consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect, special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.
Need help?
Do you have a question about the 901 Series and is the answer not in the manual?
Questions and answers