Behringer SHARK FBQ100 User Manual page 10

10
SHARK FBQ100 User Manual
Unbalanced ¼" TS connector
Balanced ¼" TRS connector
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Strain relief clamp
Sleeve
Tip
Sleeve
(ground/shield)
Tip
(signal)
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
Balanced use with XLR connectors
2 1
3
input
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
1 2
3
output
For unbalanced use, pin 1 and pin 3 have to be bridged
Fig. 3.2: Different plug types
◊
Please ensure that only qualified persons install and operate the
SHARK. During installation and operation the user must have sufficient
electrical contact to earth. Electrostatic charges might affect the
operation of the SHARK!