Tascam PCM Recorder Important Notice

Important notice
Always use the most recent version of TASCAM PCM
Recorder.
Important Notice about the

driver installation

Please be sure to remove the old driver before installing
this driver.

New functions

V1.02 additions

•
Recording/playback is now possible in iOS 5.x when
the device is locked (because of the auto-lock function
or pressing the On/Off Sleep/Wake Button).
•
In order to prevent unexpected feedback noise, the
speaker button is automatically turned OFF when
recording or in recording standby. In the previous
version, the speaker button stayed OFF after recording
(or standby) ended, but in this version, the speaker
button is turned ON again if it was ON beforehand.
•
Operation has been confirmed with the TASCAM iM2
Stereo Microphone and TASCAM iU2 Audio/MIDI
Interface.
•
In order to protect the recorded data, recording will
automatically stop before the iOS device stops when
the remaining battery charge becomes less than about
15%. In addition, if recording is started when the
remaining battery charge is near 15%, a low battery
warning appears on screen.

V1.01 additions

•
Audio input devices such as the iM2 are automatically
detected and STEREO/MONO input is set automatically.
•
STEREO/MONO mode options have been increased. In
order, you can now select STEREO, MONO-L or MONO
L+R.
•
When using SoundCloud, your Log In status (or
connection status set most recently) is retained until
you log off, making logging in easier.
•
A notification will appear informing you whether a
SoundCloud upload has completed successfully or
failed.
•
The maximum INPUT and OUTPUT gain has been
increased to +12 dB from +2 dB.
•
During recording standby, the name that will be given
to the file to be recorded will be shown.
D01172220C
PCM Recorder
Release Notes

Maintenance Items

V1.02 fixes

•
If a call was received during recording, various settings
could be lost in some cases. This has been fixed.
•
In order to prevent feedback, the speaker button
cannot be turned ON when recording.
•
When searching during playback, the location reached
might not be as expected in some cases. This has been
fixed.

V1.01 fixes

•
Application stability has been improved.
•
The limiter settings have been changed to the
following.
Threshold Level: −4 dBFS
Ratio: 50:1
Attack Time: 3 ms
Release Time: 300 ms
•
General improvements have been made to the
progress bar, cueing and other transport operations.
•
The monitoring volume can now be adjusted with the
OUTPUT slider when in recording standby or recording.
•
The remaining recording time is now calculated and
displayed correctly.
•
The MONO/STEREO input setting does not change now
when the HOME button is pressed.
•
When MONO is enabled, the monitoring signal is now
monophonic when in recording standby and when
recording.
•
When ContPlay is enabled, it now works as expected
after recording completes.
•
When ContPlay is enabled, it now works again as
expected after the last file in the track list has been
played if playback of another file is started.
•
Files imported from iTunes that have extensions in
capital letters (.WAV) are now shown in the file list.
•
iOS devices running iOS 4.3.5 also output mono
recordings on both left and right channels now when
played back.
•
When using an iPad (iOS 4.3.5), a signal input from a
mic connected to the dock will no longer be mixed
with the playback signal.
•
Touching the Cancel button on the SoundCloud screen
now closes it.
•
Now, when not connected to a network, SoundCloud
sharing will be disabled and a message will appear.
•
When already logged in to SoundCloud, touching the
Log In button no longer causes the app to freeze with a
"Login..." message on screen.
1
TASCAM PCM Recorder