Software Installation; Basic Operation - Behringer U-CONTROL UCA222 User Manual

Ultra-low latency 2 in/2 out usb audio interface with digital output
Hide thumbs Also See for U-CONTROL UCA222:
Table of Contents

Advertisement

10 U-CONTROL UCA222 User Manual
(5) OUTPUT – Connect to a speaker system using stereo RCA
cables to monitor the audio output from the computer.
(6) INPUT – Connect desired recording signal using audio
cables with RCA connectors.
(7) OFF/ON MONITOR – With the MONITOR switch OFF,
the headphone output receives the signal from the
computer over the USB port (same as the RCA output
jacks). With the MONITOR switch ON, the headphones
receive the signal connected to the RCA INPUT jacks.
(8) USB CABLE – Sends information to and from your computer
and the UCA222. It also provides power to the device.

4. Software Installation

• This device requires no special setup or drivers, just plug it
into a free USB port on a PC or Mac.
• The UCA222 comes with a free version of Audacity editing
software. This will help make the transfer process quick
and simple. Simply insert the CD into your CD-ROM
drive and install the software. The CD also contains VST
plug-ins, ASIO drivers and various freeware.
◊ Note – When the UCA222 is bundled with other
BEHRINGER products, the included software may
vary. In the instance that the ASIO drivers are not
included, you may download these from our website
at behringer.com.

5. Basic Operation

The UCA222 provides an easy interface between your
computer, mixer and monitoring system. Follow these steps for
basic operation:
1) Connect the UCA222 to the computer by plugging
the USB cable into a free USB port. The power LED
will light automatically.
2) Connect the audio source that is to be recorded,
such as a mixer, preamp, etc. to the INPUT stereo
RCA jacks.
3) Plug a pair of headphones into the 1/8" PHONES jack
and adjust the volume with the adjacent control.
You may also monitor the output by plugging a
pair of powered speakers into the OUTPUT stereo
RCA jacks.
4) You may also send the stereo signal in digital audio
format (S/PDIF) to an external recording device via
the OPTICAL OUTPUT using a Toslink fiber optic cable.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the U-CONTROL UCA222 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF