Registration - Panasonic VT60 series Ehelp

Watching TV
3D

Registration

First registration First registration First registration First registration First registration
Perform the first registration when the 3D Eyewear is used for the first time. Perform the first registration when the 3D Eyewear is used for the first time. Perform the first registration when the 3D Eyewear is used for the first time.
1. 1. 1. 1.
Turn the TV on Turn the TV on Turn the TV on Turn the TV on
2. 2. 2. 2.
Press power button for about 1 second to turn the power on. Press power button for about 1 second to turn the power on. Press power button for about 1 second to turn the power on. Press power button for about 1 second to turn the power on.
The lamp lights for about 2 seconds and then flashes. The lamp lights for about 2 seconds and then flashes. The lamp lights for about 2 seconds and then flashes. The lamp lights for about 2 seconds and then flashes.
The 3D Eyewear will be turned on and start registration. The 3D Eyewear will be turned on and start registration. The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 1.6 ft (50 cm) from the TV while Place the 3D Eyewear within 1.6 ft (50 cm) from the TV while Place the 3D Eyewear within 1.6 ft (50 cm) from the TV while
registration in progress. registration in progress. registration in progress.
3. 3. 3. 3. When the registration is successfully completed, the 3D Eyewear When the registration is successfully completed, the 3D Eyewear When the registration is successfully completed, the 3D Eyewear When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned will reconnect with TV automatically when 3D Eyewear is turned will reconnect with TV automatically when 3D Eyewear is turned will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode. on near the TV in 3D mode. on near the TV in 3D mode. on near the TV in 3D mode.
Registration again Registration again Registration again Registration again Registration again
When connection with registered TV fails, or when using with another TV, When connection with registered TV fails, or when using with another TV, When connection with registered TV fails, or when using with another TV,
re-register the 3D Eyewear. re-register the 3D Eyewear. re-register the 3D Eyewear.
1. 1. 1. 1.
Turn the TV on Turn the TV on Turn the TV on Turn the TV on
2. 2. 2. 2. Within 1.6 ft (50 cm) from the TV, press Power button until lamp Within 1.6 ft (50 cm) from the TV, press Power button until lamp Within 1.6 ft (50 cm) from the TV, press Power button until lamp Within 1.6 ft (50 cm) from the TV, press Power button until lamp
lights, then release it to start registration. lights, then release it to start registration. lights, then release it to start registration. lights, then release it to start registration.
3. 3. 3. 3. When the registration is successfully completed, the 3D Eyewear When the registration is successfully completed, the 3D Eyewear When the registration is successfully completed, the 3D Eyewear When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned will reconnect with TV automatically when 3D Eyewear is turned will reconnect with TV automatically when 3D Eyewear is turned will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode. on near the TV in 3D mode. on near the TV in 3D mode. on near the TV in 3D mode.
If the registration failed, the 3D Eyewear will power off. If the registration failed, the 3D Eyewear will power off. If the registration failed, the 3D Eyewear will power off. If the registration failed, the 3D Eyewear will power off.
In this case, power off the TV and perform from step 1. In this case, power off the TV and perform from step 1. In this case, power off the TV and perform from step 1. In this case, power off the TV and perform from step 1.
56 (0100806)