Table of Contents
Advertisement
NOTE:
*** To remove the sonar sensor from the frozen
ice, gently tap sonar sensor at the base with your
hand. If it will not come loose, spray a small amount
of water on the ice surface around the base and
repeat above step until the sonar sensor is easily
removed.
Never use a blunt object to strike the sonar sensor
as this may cause damage to the sensitive internal
electronics.
*** Cold weather is extremely hard on the electrical
components within the display housing.
It is suggested that you keep the unit in
temperatures above 0 degrees Fahrenheit
(-17
degrees Celsius) during operation.
*** Remove the batteries from the fish finder to
prevent battery leakage and corrosion.
Clean the sonar sensor and cable with fresh water
and dry-off before storing.
Do not submerge and/or spray the fish finder screen
/ housing with water or use chemicals to clean.
22
Advertisement
Table of Contents
