Floating Transducer; Fixing The Transducer - Kogan KAFSHXXGRYA User Manual

Floating Transducer

Fixing the Transducer

1 Pull out the rubber stopper, adjust
float so that it is 18 to 25 cm from the
sensor, or at your desired depth.
Replace the rubber stopper by pressing it
firmly into the float.
The Sensor float must be adjusted so that
it is a minimum of 7 inches away from the
sensor.
2 Toss the sonar sensor and float assembly into
water at your desired fishing location.
To toss, place the sonar sensor
and float in your hand, and
pitch underhand. Do not throw
the sensor by the cable as this
will cause unrepairable
damage.
Before tossing, be certain that
the cable is free from tangles
and is not wrapped around
anything.
12