Selecting The Audio Out Mode; Playing Tv Audio Only - Insignia NS-46D40SNA14 User Manual

Insignia 46" LED TV

Selecting the audio out mode

If your TV is on when you connect a device to the
AUDIO OUT/ jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
To select the audio out mode:
1 Connect headphones, an amplifier, a home
theater system, or a sound bar to the
AUDIO OUT/
following screen opens.
2 Press or to highlight the audio out mode
you want to use, then press ENTER. You can
select:
• Headphones—Select this option if you
connected headphones.
• Audio Out Fixed—Select this option to use
the remote control that came with the home
theater system or sound bar you connected to
the AUDIO OUT/
• Audio Out Variable—Select this option to
use the remote control that came with your TV
to control the audio from the home theater
system or sound bar you connected to the
AUDIO OUT/
jack on the side of your TV. The
jack to control the audio.
jack.
www.insigniaproducts.com

Playing TV audio only

You can turn off the picture on your TV and listen to
the program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then press
or ENTER. The CHANNELS menu opens.
3 Press or to highlight Audio Only, then
press ENTER.
4 Press or to select On.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
• The picture turns off in about five
seconds.
• Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.
43