Using Analog Audio - Insignia NS-46D40SNA14 User Manual

Using analog audio

When you connect a home theater system to the AUDIO OUT/
On your TV
3.5mm audio
cable connector
AUDIO OUT/
jack
To connect a home theater system or sound bar using analog audio:
1 Make sure that your TV's power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a 3.5mm audio cable (not provided) to the AUDIO OUT/
AUDIO IN jacks on the analog home theater system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV and the home theater system.
Notes
• For information about selecting the audio out mode for a home theater
• If you want to use headphones, you need to disconnect the home
30
Home theater
system
3.5mm audio cable
or sound bar, see the Headphone/Audio Out option in
sound settings" on page 42.
theater system or sound bar.
www.insigniaproducts.com
NS-46D40SNA14 Insignia 46" LED TV
jack, the TV speakers are muted.
Side of TV
jack on the side of your TV and to the
"Adjusting