Advertisement
O
O
O
O
O
To set up a Schedule
Recording,
you must first
set the TV's clock.
Set the Clock
from System
>
Time > Clock.
Recordings
are DRM-protected
and therefore
cannot be played
back on a computer
or on a
different
TV. In addition,
these files cannot
be played
back on your TV if its video circuit
is
replaced.
A USB hard drive with a speed of 5,400rpm
or above is recommended.
However, RAID-type
USB
hard drives are not supported.
A USB memory
stdck
is not supported.
The total recording
capacity
may vary depending
on the amount
of available
hard drive space
and the recording
quality
level.
Schedule
Recording
requires
at least 100MB of free space on the USB storage
device.
Recording
will stop if the available
storage space falls below
50MB while
recording
is in progress.
If the available
storage
space falls below
500MB while
the Schedule
Recording
and Time Shift
functions
are in progress,
only the recording
will stop.
The maximum
recording
time is 360 minutes.
The TV's settings
apply
when playing
back recordings
and using the Time Shift function.
If the input signal
is changed
while recording
is in progress,
the screen will go blank until the
switch
is made. Recording
will resume,
but
•
will
not be available.
Device
Performance
Test must be performed
on the USB storage
device connected
to the TV
before
a recording
can be made. A Device Performance
Test can be performed
from the On TV or
Photos,
Videos
& Music
> Recorded
TV. If recording
is selected
from Guide or the Program
Info,
USB storage device has failed
the Device
Performance
Test, the TV will
initiate
Device
Format
and conduct
Device
Performance
Test again.
When using the recording
function,
the actual recording
may start a second
or two later than the
specified
time.
If the Schedule
Recording
function
is running
at the same time as a recording
is being made on
an HDMI-CEC-compliant
external
device, the priority
is given to the Schedule
Recording
function.
Connecting
a TV-recording
USB device automatically
deletes abnormally
saved Time Shift and
recording
files.
If Off Timer
or Auto
Power
Off has been configured,
the TV will override
the setting
if recording
is in progress
at the specified
time and turn off after the recording
has ended.
Advertisement
