Drum Light ..0; Delay Start; My Cycle - Samsung DC68-03021F-06 User Manual

DRUM LIGHT ..0,.
Lights the dryer drum while the dryer is running.
Turning On and Off
To turn on or turn off the Drum Light, press and hold the Temp. button for 3 seconds. (DV405)
If you want to set or release the Drum Light, press both the Dry Level and Temp. buttons
simultaneously. (DV395/DV393)
You can turn the Drum Light on and off while your dryer is running and when it is stopped.
If you do not turn the Drum Light off within 5 minutes of turning it on, it is automatically
turned off.
DELAY START Q
You can set the dryer to start your course automatically at a later time, choosing a delay time. The hour
displayed indicates the time at which the course will be started.
1. Set your drying course.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The "Delay Start " indicator will be lit, and the clock will begin counting
down until it reaches the set time.
4. To cancel a Delay Start function, press the Power button and then turn the dryer on again..
MY CYCLE
Lets you select, save, and then activate a customized cycle that includes Dry Level, Temp option, etc. at a
later time.
To use My Cycle, follow these steps:
1. Push the My Cycle button. The My Cycle indicator lights.
2. Select the cycle you want to include using the Cycle Selector Dial.
3. Select and set the options (Dry Level, Temp, etc.)
Each cycle has certain default options that are automatically set. To see these default
options, go to page 37.
4. Push the Start/Pause button. The cycle starts.
5. As the dryer moves through the cycle, it memorizes the cycle and the options.
6. To run this cycle again at a later time, press the My Cycle button. The dryer automatically
selects the saved cycle and options.
You can change the My Cycle settings by repeating the process above.
The dryer will use these settings the next time you choose My Cycle.
operating Instructions, tips 27