Table of Contents
Advertisement
• Noise reduction: allows you to enable suppression of
background audio.
• Increase volume in pocket: enables the ringtone volume to be
increased when the device is in a pocket or bag.
• Voicemail service: allows you to assign the service.
• Voicemail settings: displays the settings for the voicemail.
• Sound: assigns your device's ringtone.
• Vibrate: configures the vibrate settings.
• Auto retry: when enabled, allows the phone to repeatedly try to
connect to a busy number.
• TTY mode: allows you to configure the TTY settings. For more
information, refer to "TTY Mode" on page 279.
• DTMF tones: allows you to set the lengths of DTMF tones. For
more information, refer to "DTMF Tones" on page 279.
• Voice privacy: allows you to enable/disable an enhanced
privacy mode. The Voice Privacy option automatically reduces
the sound of the incoming caller's voice for enhanced privacy.
For more information, refer to "Voice Privacy" on page 279.
Call rejection
1. From the main Call settings page, tap Call rejection
Auto reject mode and tap one of the following options:
• Off: to deactivate the feature.
• All numbers: to reject all calls.
• Auto reject numbers: to reject all calls in your Reject list.
2. Tap Auto reject list.
3. Tap
to manually add numbers to the Reject list.
4. Tap Unknown to create a check mark and automatically
reject all calls that are not in your Contacts list.
Set reject messages
1. From the main Call settings page, tap Set up call
rejection messages.
2. Tap
to manually add a reject message.
– or –
Tap one of the pre-written messages to be displayed
when you want the call to be rejected. You can edit the
message if desired.
3. Tap Save to save the reject message.
Changing Your Settings
275
Advertisement
Table of Contents
