Advertisement
Important Safety Instructions,
Equipment Placement
WARNING:
Avoid personal injury and damage to this equipment. An unstable mounting
surface may cause this equipment to fall.
To protect against equipment damage or injury to personnel, comply with the
following:
Install this equipment in a restricted access location (access restricted to service
personnel).
Make sure the mounting surface or rack is stable and can support the size and
weight of this equipment.
Pedestal, Service Closet, Equipment Room or Underground Vault Installation
WARNING:
Avoid the possibility of personal injury. Ensure proper handling/lifting
techniques are employed when working in confined spaces with heavy
equipment.
Ensure this equipment is securely fastened to the mounting surface or rack where
necessary to protect against damage due to any disturbance and subsequent fall.
Ensure the mounting surface or rack is appropriately anchored according to
manufacturer's specifications.
Ensure the installation site meets the ventilation requirements given in the
equipment's data sheet to avoid the possibility of equipment overheating.
Ensure the installation site and operating environment is compatible with the
equipment's International Protection (IP) rating specified in the equipment's data
sheet.
Connection to Network Power Sources
Refer to this equipment's specific installation instructions in this manual or in
companion manuals in this series for connection to network ferro-resonant AC
power sources.
OL-30194-01
Continued
Continued on next page
3
Advertisement
