Table of Contents
Advertisement
Quick Links
PREMIER AL Local Panel
Repeater Application,
Installation and
Commissioning Manual
For the PREMIER AL
1.0
Introduction ........................................................................................................... 2
2.0
Cabinet Specifications ........................................................................................... 3
2.1
Repeater Panel Order Codes & Descriptions ..................................................... 3
2.2
Small Repeater Semi-Flush Bezel..................................................................... 4
2.3
Small Repeater Fully Flush Bezels ................................................................... 5
3.0
Hardware Specifications........................................................................................ 6
3.1
User Controls & Indications (General Overview).............................................. 7
3.2
Printed Circuit Board Viewed from Inside the Cabinet ........................................ 9
4.0
Cabinet Installation................................................................................................ 9
5.0
Display Address Setting ...................................................................................... 11
6.0
Commissioning Procedure................................................................................... 11
Appendices .................................................................................................................... 14
Technical Specifications...................................................................................... 14
ii
Other Relevant Documentation ........................................................................... 14
iii
Repeater Node DIL Switch Settings ................................................................ 15
ZT 37 -250
Contents
Advertisement
Table of Contents
Related Manuals for Zooper ZT37 -250 REP-AL/P
Summary of Contents for Zooper ZT37 -250 REP-AL/P
-
Page 1: Table Of Contents
ZT 37 -250 PREMIER AL Local Panel Repeater Application, Installation and Commissioning Manual For the PREMIER AL Contents Introduction ......................2 Cabinet Specifications ................... 3 Repeater Panel Order Codes & Descriptions ............. 3 Small Repeater Semi-Flush Bezel..............4 Small Repeater Fully Flush Bezels ..............5 Hardware Specifications.................. -
Page 2: Introduction
Introduction The A1575 Premier AL Repeater (REP AL) range of repeaters is designed for use with the Premier AL Panel. Three versions are available for each panel: - The Basic LCD display Repeater with user controls (Please refer to the section on user controls for a full specification). -
Page 3: Cabinet Specifications
Cabinet Specifications The repeater panels are available with surface, semi flush or fully flush enclosures to match the PREMIER AL panels. The section of this manual shows the two panel cabinet options. Dimensions Protection Plugs 13 off 370mm 325mm 106mm Repeater Panel Order Codes &... -
Page 4: Small Repeater Semi-Flush Bezel
Small Repeater Semi-Flush Bezel Dimensions Hole height 375mm Hole width 330mm Hole depth 76mm Max bezel height 435mm Max bezel width 388mm Bezel overlap 30mm 30mm Bezel depth Door protrusion 30mm Part No Description 2501/121 Semi-flush bezel to fit A1575 Small Repeater 2501/124 Semi-flush bezel to fit A1575 large Repeater... -
Page 5: Small Repeater Fully Flush Bezels
Small Repeater Fully Flush Bezels Dimensions Hole height 375mm 345mm Hole width Hole depth 106mm Bezel height 411mm 423mm Bezel width Hinge protrusion 20mm Part No Description 2501/127 Fully-flush painted bezel for A1575 small repeater panel (painted to customer's specification) 2501/128 Fully-flush stainless steel bezel for A1575 small repeater panel (brushed or polished) 2501/129... -
Page 6: Hardware Specifications
Hardware Specifications Optional Power Supply Mounted on Chassis Display board assembly mounted on removable door Battery Clamps Power Supply mounted on removable chassis Display board and zone LED assembly mounted on removable door Battery Clamps Optional Printer... -
Page 7: User Controls & Indications (General Overview)
User Controls & Indications (General Overview) 20 character by 4 line OVERRIDE LCD display. Back-lit EVACUATE DELAY when event present or Access controls switch SCROLL SILENCE MESSAGES BUZZER TEST SILENCE / RESOUND ALARMS ALARMS User controls. Only override delay is TEST available without RESET... - Page 8 3.1.1 User Controls and Indications in Detail Operates all sounder circuits Overrides the delay to outputs continuously function and immediately actions the outputs OVERRIDE EVACUATE DELAY Displays the next message at the current event level Silences the internal buzzer SCROLL SILENCE for any condition MESSAGES...
-
Page 9: Printed Circuit Board Viewed From Inside The Cabinet
Printed Circuit Board Viewed from Inside the Cabinet EPROM WITH SOFTWARE REFERENCE PROC RESET DISPLAY NODE ADDRESS DIL SWITCH CONNECT TO PANEL PROC FAILED CONNECT TO NEXT REPEATER COMMS FAILED 24V AND 0V SUPPLY PRINTER ZONE BOARD ZONE BOARD DISABLE INTERFACE INTERFACE MONITORING LINK... - Page 10 IMPORTANT NOTES ON BATTERIES: DANGER: Batteries are electrically live at all times, take great care never to short circuit the battery terminals. WARNING: Batteries are often heavy, take great care when lifting and transporting batteries. For weights above 24 kilos, lifting aids should be used. WARNING: Do not attempt to remove battery lid or tamper with the battery internal workings.
-
Page 11: Display Address Setting
NOTE: The chassis screws are bright chrome finish. Fix the empty enclosure to the wall using the fixing hole(s) in the upper section of the enclosure. Complete the fixing operation using the remaining fixing holes in the enclosure. Gland installation wiring into the enclosure using the cable entry points provided. Leave plugs in any unused cable entry holes. - Page 12 6. If the D.C. power is derived from the main fire alarm panel then ensure that the drain wires of the incoming cables have been connected to an Earth point at the fire alarm panel. 7. If a printer and/or zone board is fitted then check that the ribbon cables are correctly connected.
- Page 13 If you are installing more than one A1575 repeater then each repeater should be installed and commissioned individually.
-
Page 14: Appendices
Appendices Technical Specifications A1575 Premier AL Stand Alone Repeater mains failed current consumption @ 25 V DC. Repeater status Powered from panel Powered from auxiliary supply local 1A p.s.u. batteries Mains failed battery current 40mA 105mA Alarm condition battery current 75mA 140mA Maximum battery current... -
Page 15: Repeater Node Dil Switch Settings
Repeater Node DIL Switch Settings Decimal S13 – 1 S13 – 2 S13 – 3 S13 – 4 PREMIER AL Value Bit 0 Bit 1 Bit 2 Bit 3 Assignment Not used Repeater 1 Repeater 2 Repeater 3 Repeater 4 Repeater 5 Repeater 6 Repeater 7...
Need help?
Do you have a question about the ZT37 -250 REP-AL/P and is the answer not in the manual?
Questions and answers