Receiving An Incoming Dsc Test Call Reply (Dsc Test Ack); Acknowledging An Incoming Dsc Test Call - B & G V50 VHF User Manual

DSC CALL
LL REQUEST▲
TRACK BUDDY
►DSC TEST
MMSI/GPS
6. If there is no reply after 30 seconds, the radio asks you if you want to retry.

8-13-2 Receiving an incoming DSC TEST call reply (DSC TEST ACK)

When you receive notification of a DSC TEST reply, press SILENC softkey (AIS/IC key) to
1.
silence the alert.
2. If the radio recognizes the user MMSI as one of your buddies, the buddy's name is
displayed in place of the user MMSI.

8-13-3 Acknowledging an incoming DSC TEST call

The radio sounds a friendly two-tone alert when it detects an incoming DSC TEST call.
Note: If TEST REPLY is set to AUTO, no sound will be emitted.
1. If the radio recognizes the MMSI as one of your buddies, your buddy's name is displayed
in place of the MMSI.
Press SILENC softkey (AIS/IC key) to silence the alert.
2.
3. The radio will automatically acknowledge the call if TEST REPLY is set to AUTO (See sec-
tion 5-9) and after a TIMEOUT period set for AUTO REPLY (See section 5-10).
TEST
CALL FROM
TOM
AUTO ACK
▼
00:01
4. Alternatively, if TEST REPLY is set to MANUAL, a manual response is required, press ACK
(AIS/IC key) to acknowledge the DSC Test Call.
TEST
CALL FROM
TOM
AUTO ACK
▼
00:01
5. Press +/- button or rotate the CH knob to scroll any further information (if available), or
press EXIT to cancel.
DSC TEST
MANUAL NEW
SAM
►TOM
CALL FROM
TOM
AUTO ACK
IN 10S
▲▼
00:02
CALL FROM
TOM
AUTO ACK
IS OFF
▲▼
00:02
B&G - V50 & H50 Operation Instructions
TOM
DSC TEST
►SEND?
TOM
DSC TEST
WAIT.. 00:17
55