Yukon Exelon 24101 Manual

Download this manual

OVERVIEW

The Exelon night vision monocular with a super tube is a professional device with enhanced image

quality throughout the whole field of view. A unique optical arrangement of the objective, coupled with

a new, specially designed tube of a new type, has contributed to the high resolution and absence of

distortion on the whole field of view. This unit operates both in the passive mode (without man-made

sources of light) and in the active mode (with the IR illuminator on). The Exelon is designed for

outdoor observation, guarding and terrain orientation within a wide range of natural night light - from

twilight to utter darkness.

The Exelon has a built-in IR-illuminator intended for use in moonless cloudy conditions in total

darkness.

The unit is equipped with two 1/4 inch sockets which allow it to be fixed on the headmount and used

as goggles. Its surface is rugged for extreme field conditions. However, damage may occur if the unit is

dropped. The Exelon unit is fully self-contained and can work up to 50 hours on one CR123A battery

at temperatures from -30 °C~+ 40 °C.

Your Exelon is ideal for professional and amateur use, including:

• Night observation in natural environment

• Search and rescue

• Boating

• Repair and maintenance of equipment

PECULIARITIES OF USE

Your night vision device Exelon is designed to provide many years of reliable service.

To ensure high performance you should adhere to the following rules:

Page 1 OVERVIEW The Exelon night vision monocular with a super tube is a professional device with enhanced image quality throughout the whole field of view. A unique optical arrangement of the objective, coupled with a new, specially designed tube of a new type, has contributed to the high resolution and absence of distortion on the whole field of view.
Page 2: Battery Installation
• Do not direct a unit in the “on” position at intense sources of light, such as car's headlights or burning fire. This may disable the unit for an unknown length of time or cause a dark spot in the center of the field of view. Do not turn the unit on in daylight without the protective cap firmly secured over the objective lens, as this may damage the unit.
Page 3: Troubleshooting
• Direct your Exelon at the subject to be viewed and adjust the final focus by rotating the objective lens (5) focusing ring until the image quality is optimal. • When you are finished using your Exelon put the cap back on the objective and place the unit in the carrying case.
Page 4 • The scope flickers, flashes or “snows”. The scope may flicker or flash when used in a bright environment; to correct this, place the cap over the objective lens and enter a dark environment. The scope will restore itself to a natural functioning state in several minutes or hours, depending on how long the scope had been exposed to the light.

Exelon 24102