Download Print this page

Operating Your Fan - Goldair GCTF250 Operating Instructions Manual

82cm tower fan with remote

Advertisement

Operating your Fan

Fan control
Place the Fan on a dry, level and sturdy
surface. Plug the power cord into the socket.
Power The fan functions ON and OFF by
pressing the power button. Lights on the fan's
control panel indicate the power is ON. The
unit will default to Low Speed when the unit is
first turned on.
Fan speed The fan speed can be adjusted
by pressing the SPEED button. Press the
button to switch between fan speed settings:
1 = Low, 2 = Medium, 3 = High
Timer The timer function allows the unit to be
set to operate for a length of time from ½
hour to 7 ½ hours, in increments of a ½ hour.
Press the Timer Button to set the time
desired. Each time the timer button is
pressed, the time is increased by ½ hour.
After reaching 7 ½ hours, pressing the timer
button once more will re-set the Fan for
continuous running. The lights in front of the
unit will light up appropriately with the length
of time that the Fan is set for.
Oscillation The oscillation feature can be
activated by pressing the Oscillation button.
The fan can be set to a stationary position by
pressing the button again.
As well as oscillating from side to side, this
Fan is equipped with a 5 position oscillating
mechanism. By holding the head of the unit
and gently turning from side to side, locate
the direction most desired.
Natural wind This Natural Wind function
allows the unit to be set in Rhythm and Sleep
Mode. Pressing the Natural Wind Button
once will set the unit in Sleep button.
Pressing the Natural Wind Button twice will
set the unit in Rhythm mode. Either Natural
Wind modes will function in any speed.
Rhythm mode This function allows a
fluctuation of air flow as natural wind does
outside. An orange light will appear above
the Natural Wind icon after the Natural Wind
Button is pressed twice. The Rhythm Mode
will change the speed of the Fan constantly
at random. Depending on which speed the
unit is in will determine the variation in the
speeds.
High Speed Mode: The Rhythm Mode will
vary among the three speeds and off.
Medium Speed Mode: The Rhythm Mode
will vary among medium speed, low speed
and off.
Low Speed Mode: The Rhythm Mode will
vary between low speed and off.
Sleep mode An orange light will appear
above the Natural Wind icon after the Breeze
Button is pressed once. The Sleep Mode will
change the speed of the fan to the next lower
speed after every half-hour. The sleep mode
operates as follows:
High Speed Mode: If the fan is in high speed
when the Sleep Mode is turned on, the unit
will remain on high speed for half hour and
then will change to medium speed for
another half hour. Finally, the fan will change
to low speed and will remain on low speed
until the unit is switched off.
Medium Speed Mode: If the fan is in
medium speed when the Sleep Mode is
turned on, the fan will remain on medium
speed for half hour and then will change to
low speed unit until the unit is switched off.
Low Speed Mode: If the Fan is in Low speed
when the Sleep Mode is turned on, the unit
will remain on low speed until the unit is
switched off.
Note: Depending on which speed the fan is
in when the Sleep Mode is turned on, after
reaching the lowest speed, the Sleep Mode
will remain on low speed until the unit is
switched off by the user or automatically
when using the timer.

Advertisement

loading