GE EER3000 Owner's Manual page 22

Usingthe self-cleaning oven.
@
How to Delay the Start of Cleaning
Make sure tile clock shows tile correct
time of day.
[] i,atch tile door.
[] Touch
the SELFCLEAN pad.
[] Using tile + or - pads, enter tile
desired clean time.
[] Touch
tile START TIME pad. Tile
earliest start time _ou can set will
appear in the displa}.
[] Using the + or - pads, enter tile
time of (Ira you want tile clean c_cle
to start.
[] Touch tile START/ON pad.
Tile display will show tile start time. It
will not be possible to unlatch tile oven
door until tile temperature drops below
tile lock temperature.
Tile oven shuts off autonmtically when
tile clean cycle is complete, and 0:00 will
flash in tile display.
To Stop a Clean Cycle
Toud/tile CLEAR/OFFpad.
_fit until tile oven has cooled below tile
locking temperature to unlatch tile/looI:
You will not be able to open tile door
right away unless tile ()veil has cooled
below tile locking temperature.
After a Clean Cycle
You may notice some white ash in tile
()veil. Wipe it up with a dmnp cloth atier
tile
oven cools.
If white spots rema/k remove them with a soap-
filled scouringpad and rinse thoroughlywith
a w))egarand water mixture.
These deposits are usually a salt
residue that cannot be removed bv
the clean cycle.
If tile oven is not clean alter one clean
cycle, repeat the cycle.
!i_: Y ou cannot set tile o_en fin" cooking
until tile oxen is cool enotwh fi)r tile
0
door to be unlatched.
::Ji:: While tile ()veil is self-cleaning, you
can press the CLOCK pad to display
the time of day. To return to the
clean countdown,
press tile COOKING
TIME pad.
::Ji:: Apply a small amount of vegetable oil
to a paper towel and wipe tile edges of
the ()veil shelves with tile paper towel.
Do not spray with Pare > or other
lubricant spra)_s.
22