Omnipass Control Center - Fujitsu Stylistic Q552 User Manual

OmniPass Control Center

This section serves to explain functions within OmniPass Control Center that weren't explained earlier.
You can access the OmniPass Control Center any of three ways:
• Double-click the golden OmniPass key shaped icon in the Windows taskbar (typically in the lower-right corner
of the desktop)
• Click the Start button; select the Programs group; select the Softex program group; and click the OmniPass
Control Center selection.
• Open the Windows Control Panel (accessible via Start button --> Settings --> Control Panel) and double-click
the Softex OmniPass icon.
User Management
The User Management tab has two major interfaces: Add/Remove User and Import/Export User. Import/Export User
functionality is documented in "Exporting and Importing Users" on page 115. Add/Remove User functionality is
straightforward.
If you click Adds a new user to OmniPass you will start the OmniPass Enrollment Wizard. The Enrollment Wizard is
documented in "User Enrollment" on page 108.
If you click Removes a user from OmniPass, OmniPass will prompt you to authenticate. Authenticate with the
credentials (or enrolled fingerprint) of the user you wish to remove. OmniPass will prompt you to confirm user
removal. Click OK to complete user removal
R
EMOVING A USER WILL AUTOMATICALLY DESTROY ALL
ASSOCIATED WITH THE USER WILL BE LOST
I '
F YOU RE SURE YOU WANT TO REMOVE THE USER
.
O P
MNI ASS DATA ASSOCIATED WITH THAT USER
.
,
WE RECOMMEND YOU EXPORT THE USER PROFILE
117 - Introducing the Fingerprint Sensor Device
. A
LL IDENTITIES AND CREDENTIALS
.