Installing Driver Over The Network - Samsung SL-C460FW User Manual

Installing driver over the network

• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 23).
• You can install the printer driver and software when you insert the
software CD into your CD-ROM drive.
For windows, select the printer driver and software in the
Software to Install window.
6
Windows
The firewall software might be blocking network communication. Before
connecting the device to the network, disable the computer's firewall.
1 Make sure that the machine is connected to the network and powered
on. Also, your machine's IP address should have been set (see "Setting IP
address" on page 146).
Insert the supplied software CD into your CD-ROM drive.
2
Review and accept the installation agreements in the installation
3
window. Then, click Next.
4 Select Network Connection on the Printer Connection Type screen.
5 Follow the instructions in the installation window.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
Select
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line
/s or
/S
Definition
Starts silent installation. Installs machine drivers
without prompting any UIs
or user intervention.
2. Using a Network-Connected Machine
Description
149