Cycle Option Buttons - LG DLE2701V User's Manual & Installation Instructions

!!0 TO USE
CYCLE OPTION BUTTONS
Your dryer features several additional cycle
options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function (see the following page
for details) that can be activated by pressing and
holding that option button for 3 seconds.
TO
@
@
0
Add Cycle options to a Cycle:
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
Use the cycle settings buttons to adjust the
settings for that cycle.
Press the cycle option button(s) for the
option you would like to add. A confirmation
message will be shown in the display.
_! Press the START/PAUSE button the
to start
cycle. The dryer will start automatically.
WRINKLE CARE
Selecting this option will tumble the
load periodically for up to 3 hours after
the selected cycle, or until the door
is opened. This is helpful in preventing wrinkles
when you are unable to immediately remove
items from the dryer.
TO Install the Drying RaCk
t_ With the dryer door open, slide the rack into
the dryer drum.
t_ Make sure it is seated evenly on the edge
of the inner door rim and resting flat on the
inside of the dryer.
NOTE: Be sure to remove the drying rack
after using the RACK DRY cycle.
DAMP DRY BEEP
With this option, the dryer will beep
when the load is approximately 80%
dry. This allows you to remove
faster-drying lightweight items or items that you
would like to iron or hang while still slightly damp.
RACK DRY
Use RACK DRY with items, such as
wool sweaters, silk, and lingerie, that
should dry flat. RACK DRY can also be
used with items that should not be tumbled dry,
such as gym shoes or stuffed animals.
NOTE: NEVER use the rack with a tumble
dry cycle.
51