Emergency Stop Switch And Switch Clip (Side-Mount Type) - Honda BF40A Owner's Manual

CONTROLS AND FEATURES
Turning the ignition switch key to the
START position operates the starter
motor. The key automatically returns
to the ON position when released
from the START position.
The ignition switch can be used to
start the engine only when the
gearshift lever is in the N (neutral)
position (p. 40 ), and the switch clip
is in the emergency stop switch.
Turning the ignition switch to the
OFF position stops the engine.
20
Emergency Stop Switch and
Switch Clip (side-mount type)
EMERGENCY
STOP SWITCH
LANYARD
SWITCH CLIP
LANYARD
SWITCH CLIP
The switch clip must be inserted in
the emergency stop switch in order
for the engine to start and run. The
lanyard must be attached to the
operator's PFD (Personal Flotation
Device) or worn around the wrist as
shown.
When used as described, the
emergency stop switch and lanyard
system stops the engine if the
operator falls away from the controls.
A spare switch clip is stored in a slot
in the control housing.
SPARE SWITCH CLIP