Fast Idle Lever (Side-Mount Type); Gearshift/Throttle Control Lever (Side-Mount Type) - Honda BF40A Owner's Manual

Fast Idle Lever
(side-mount type)
GEARSHIFT/THROTTLE
CONTROL LEVER
The fast idle lever is used to set idle
speed during warm-up.
The lever will not move unless the
gearshift/throttle control lever is in
the N (neutral) position. The fast idle
lever must be in it's lowest position
for you to move the gearshift/throttle
control lever out of neutral.
N (neutral)
FAST IDLE
START
Leave the fast idle lever in the
START position to provide a rich
fuel mixture for starting a cold
engine.
Lift the fast idle lever to accelerate
the warm up of a cold engine after
starting and to start a warm engine.
FAST IDLE LEVER
CONTROLS AND FEATURES
Gearshif t/Throttle Control
Lever (side-mount type)
GEARSHIFT/THROTTLE
CONTROL LEVER
The control lever automatically locks
itself in the N (neutral) position. To
move the lever out of the N (neutral)
position, you must squeeze the
neutral release lever on the underside
of the lever handle.
NEUTRAL
RELEASE
LEVER
21