ASTRO A50 Instruction Manual page 11

MixAMP® TX USER INTERFACE
Power / Pairing
MixAmp™ Tx - Top:
Left Button: Power/Pairing
Right Button: Dolby® Headphone Virtual 7.1 Digital Surround
On/Off
MixAmp™ Tx - Rear:
PWR: Connect the USB Power Cable from this port to a free port
on your console or PC to power the MixAmp™ Tx and enable
voice capability*.
AUX: Auxiliary In. Plug your media device into this port with an
optional 3.5mm cable in order to wirelessly stream audio to
your A50 headset. Intended for use with MP3 players, phones,
and PCs (when optical digital out is not available).
Dolby® Headphone
Button
AUX In Optical In from TV or Console
USB Power / Optical Out
Voice Passthrough
OPT-OUT: Optical Out Pass through, use this input to connect
your home theater system.
OPT IN: Use this input to connect the Optical Cable from TV, PC,
or console
USB: Insert the USB Charging Cable into this socket, and attach
the other end to the port on your A50s when not in use. This
port is also utilized when updating to the latest firmware.
*Additional setup may be required for some systems. Don't
panic. Simply refer to the System Configuration for your gaming
console or PC to get you all sorted out.
USB
Charging Port
ASTRO GAMING
CONFIDENTIAL 2013
EYES ONLY
010185