Table of Contents
Advertisement
Quick Links
DISTINGUISHING FEATURES OF THE PHANTOM
• Five (three - if EMP66G tube employed) readily available configurations of illuminated
red-on-green reticles that are able to be switched at a moment's notice
• Functions with one AA (1.5V) or CR-123 (3V) battery
• Accurate internal front lens focus adjustment
• Lightweight and highly durable; manufacturing employs carbon plastic and other modern
technologies
• High magnification, 3x or 4x
• Close observational range of 5 meters
• IPX6 rating against water intrusion
• Shockproof with the use of heavy recoil ammunition (.375 H&H, .416 Rigby, .50 cal.), up
to 6000 joules
• Vertical positioning of the battery ensures an uninterrupted power supply when firing
• The image intensifier tube is protected against excessive light exposure
• Incremental reticle brightness adjustment
• The reticle will blink as a warning 15-30 minutes before the device shuts down
automatically as a low battery indicator
• Stabilized power supply for optimal consumption, ensuring no shift of the aiming point
under a continuous power draw or drop in temperature
• Fast start-up
• Ergonomic design; the adjustment controls are located on top
• Precision internal windage/elevation adjustment MOA per click
• Built-in high-power PULSE hazard free IR illuminator with beam focus
• Remote control with secure attachment
• Additional weaver MIL-STD-1913 rail for accessories
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Yukon PHANTOM 26057T
Summary of Contents for Yukon PHANTOM 26057T
- Page 1 DISTINGUISHING FEATURES OF THE PHANTOM • Five (three - if EMP66G tube employed) readily available configurations of illuminated red-on-green reticles that are able to be switched at a moment's notice • Functions with one AA (1.5V) or CR-123 (3V) battery •...
-
Page 2: Operating Instructions
• Flip-up objective lens cover • Stylish carrying case • Optional accessories provide photo and video recording The PHANTOM is a complex electro-optical device designed using innovative technology. We strongly recommend reading and following all the instructions carefully before turning on the riflescope. Not following the instructions and guidelines outlined in this instruction manual can cause damage to the device, as well as voiding any applicable warranty. -
Page 3: Battery Installation
• When using in bright conditions (early morning or late evening), do not leave the device on with the objective lens cap open for more than 30 minutes. Continuous observation of bright stationary objects can cause the electronic-optical converter to fade, leading to the appearance of dark spots in the field of vision. - Page 4 • When finished, turn off the riflescope by turning the selector switch (3) to the “OFF” position and replace the objective lens cap (2). • It is possible to mount the scope onto the firearm using a special bracket (9); after the initial mounting is performed, it is important to follow further mounting instructions in the section entitled “SIGHTING IN THE PHANTOM”.
- Page 5 MIL-DOT RETICLE Your night vision riflescope Phantom has a Mil-Dot reticle installed which helps you determine distance to the target if you know its actual size. The Use of a Mil-Dot reticle: Viewing the target through the riflescope place the edge of one post against one edge (top, bottom, or either side) of the target so that the crosshair extends along either its width or height.
- Page 6 The scope has a built-in additional weaver rail mount (14) housed on the left portion of the body. This will allow the mount of additional devices, such as: • The Yukon IR illuminator, with mount (#29072) • The Yukon NVRS directional microphone with adapter (#27022) • The Yukon laser sighting device (#27012)
-
Page 7: Troubleshooting
STORAGE Always store the unit in its carrying case in a dry, well-ventilated space. For prolonged storage, remove the batteries. TROUBLESHOOTING Listed below are some potential problems that may occur when using the PHANTOM. Carry out the recommended checks and troubleshooting steps in the order listed. Please note that the table does not list all of the possible problems. - Page 8 off via the selector switch control. on the scope. The aiming point shifts The riflescope is not mounted Check securely after firing rounds. securely. riflescope has been mounted and make sure that the same type and caliber bullets are being used as when the scope was initially sighted in;...
Need help?
Do you have a question about the PHANTOM 26057T and is the answer not in the manual?
Questions and answers