GE EGR3000 Owner's Manual & Installation Instructions page 41

Installation instructions
[] ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Appliance Power Cord will be
Disconnected Frequently.
Do not use :m adapter plug in these situations because
disconnecting of the power cold places undue strain on
the adapter and leads to e\vnmal fililure (ff the adapter
gr(mnd terminal. The custonler should have the 2-prong
wall receptacle replaced with a three-prong (grounding)
receptacle by a qualified electridan befbre using the
appliance.
Tile installation (ff appliances designed %r mobile home
installation must confln'm with the Manufitctm'ed
Home (_oustruction and Safety Standard, Tide 24 (;FI_,
Pai_ 3280 (flmnerly the Federal Standard for Mobile
Home (_onstruction and Safbt},', Title 24, HI_)D, Pain: 280)
oI; when such standard is not applicable, the Standard
%r Manufi_ctured Home Installations, latest edition
(Manuflictm'ed Home Sites, (kmmmnities and Set-Ups),
ANSI A225.1, latest edition, or with local codes. In
Canada, mobile home iusmllation must be in accordance
with the on'lent CAN/CSA Z240/MH Mobile Home
lustallation Code.
Electric Disconnect
[] Locate disomnect plug on tile range back.
[] Pinch sides ot com, ector and pull out of range back.
[] SEAL THE OPENINGS
Seal any openings ill the wall behind the range and ill
the floor under the range when hookups are completed.
[] CHECK IGNITION OF SURFACE
BURNERS
Opeiafion of all cooktop and oxen burners shouM be
checked aftei the i ange and g_s supp b lines brae been
carefiflh checked ibr leaks.
I?3ectric Ignition Models
Select a top burnei knob and sinmlmneous b push in and
turn to LITE position. 5bu will hear a clicking sound
indicating proper opeiafion of the spark module. Once the
air has been purged th)m the suppl} lines, burners should
light wflhin 4 seconds. After burner lights, romm knob out of
the LITE position. Tr_ each burner in succession until all
burners brae been checked.
Quality of Flames
The combustion qua]d} of burner drones needs to be
determined _isuNh.
(A) Yellow flames--
Call for service
(B) Yellow tips on
outer cones--
Normal for LP gas
(C) Soft blue
flames--Normal for
natural gas
If burner flames look like (A), call for service. Normal
burner flames should look like (B) or (C), depending
on the type of gas you use.
Widl LP gas, some yelh)w tipping on outer cones is normal.
[] CHECK IGNITION OF OVEN BURNER
The oxen is desig_led to ot)eram quietl} and m_tomafically.
To ot)erate the oxen, press the BAI_ pad mitt then press the
number pads until 350 ° at)t)eai_s ill the (tispla}_ Touch tile
START t)ad. After 30-90 seconds, the oxen burner will ig_lim
and burn until tile set mmpeiature is reached. The oxvn
burner will continue to cycle on and off as necessar_ to
maintain the oxen at the temperature indicated b! tile displa}
To check ig_lition of tile broil burneI; touch tile BROIL
HI/tO pad and then file START pad. After 30-90 seconds,
the broil burner will ig_lite.
Electric ignition models require electrical power to ot)eram.
Ill c_tse of a p(_wer oumge, tile oxen burnei_ on these models
cannot be lit manualh with a match. Gas will not f]()_aunless
the g]o_ bin" is hot.
If the oxen is ill use >.ben a power oumge occtu% the
btlrner
will shut off and cannot be re-lit tmfil power is restored.
41