Mounting The Nüvi On Your Dashboard; Removing The Nüvi And The Mount; Removing The Cradle From The Mount - Garmin nvi 310 Owner's Manual

a
ppendIx
Mounting the nüvi on Your Dashboard
Use the enclosed mounting disk to mount your nüvi to the dashboard.
important: The permanent mounting adhesive is extremely difficult to remove after
it is installed.
To install the mounting disk:
1. Clean and dry the dashboard where you want
to place the disk.
2. Remove the backing from the permanent
mounting adhesive on the bottom of the
disk, and place the disk on the
dashboard.
3. Place the suction cup mount on top of the disk
4. Flip the suction lever down to secure the suction cup mount to the disk.
Removing the nüvi and the Mount
1. To remove the nüvi, press up on the tab on the bottom of the cradle.
2. Lift the nüvi off of the mount.
3. To remove the suction cup from the windshield, flip the lever toward you.
4. Pull the tab on the suction cup toward you.

Removing the Cradle from the Mount

To remove the cradle from the mount arm, turn the cradle to one side. The cradle
snaps off of the ball socket. To replace the cradle, snap the cradle on the ball socket.

Suction
lever
nüvi 310/360 Owner's Manual
Suction
cup mount
Disk