AMERICANA A3316ABSBRWW Owner's Manual & Installation Instructions page 13

Installation instructions
I
I_ REVERSING THE HARDWARE (CONT.)
4.2 Interchange hinge (and the shim glued to it) and
screws at top right with screws at top left of cabinet.
Do not tighten screws on hinge side at this time.
Installingthe hingeon the left. Installingthe hinge on the right.
NOTES:
• Some hinges have four holes. Which holes you
use for installing tile hinge depends on which
side you install tile hinge.
• Tile outer edge of tile hinge should be parallel
to tile edge of tile case for correct installation.
I-_ REVERSING THE DOOR HANDLES
5.1 Transfer fresh food door handle
5.1.1 Remove tile handle plug using a rope-tipped
putty knife under tile edge, and remove tile
screw underneath. Remove tile two screws
holding tile handle to tile top of tile dooL
Plug'_
5.1.2 Remove tile handle.
5.1.3 Remove tile screws from tile right edge of tile
door top and insert them into tile handle screw
holes on tile opposite side.
Screws
for Handle
Holes
I
[] REVERSING THE DOOR
HANDLES ICONT.I
5.1 Transfer fresh food door handle (cont.)
5.1.4 With tape-tipped putty knife or thin-blade
screwdriver, pry out tile plug button flom tile
hinge hole on the left side of tile door and
insert it into tile hole on tile opposite side that
was vacated by removal of tile top hinge.
PlugBu_
5.1.5 Pull tile plug button flom tile flont of tile door
and transfer it to tile opposite side.
PlugButton
Toreattachthe
handle onthe
oppositeside.
5.2 Transfer door stop
5.2.1 Move tile metal
door stop from
tile right end to
tile left end.
DoorStop
Left_:_"
5.2.2 Move any
screws froII1
tile left end to
tile right end.
R ight Si_........_
5.3 Reinstalling
the Fresh Food Door
Handle
5.3.1 Attach tile handle to
tile right side of tile I ---"-_
door with screws at
tile top and under
tile handle plug. _
5.3.2 Reinstall the
handle plug.
13