Garmin GPSMAP 76S Quick Start Manual page 10

Changing the name:
1. Using the ROCKER key, highlight the Name Field then press the ENTER key.
2. Press the ROCKER key to the left, this will clear the name fi eld.
3. Press the ROCKER key up, scroll through the alpha-numeric list until the letter
'C' is selected.
4. Press the ROCKER key right to move to the next placeholder.
5. Press the ROCKER key down, scroll through the alpha-numeric list until the
letter 'R' is selected.
You should be starting to get the feel of it. Continue entering letters until you
have spelled the word CREEK.
6. With the letter 'K' highlighted, press the ENTER key to accept the name.
You can enter any name that you like as long as it does not exceed ten charac-
ters, and does not duplicate a previously saved waypoint.
When you have fi nished renaming the waypoint you will need to store it in
the units' memory.
To store the waypoint:
1. Using the ROCKER key, highlight the 'OK' Button and press the ENTER key.
These are the same steps that you will use to enter names and change numbers
and select options in all of the fi elds in the GPSMAP 76S.
Here are a couple of tips:
1. If you press and hold the ROCKER key while scrolling through the alpha-
numeric list, it will move quickly.
2. You can scroll through the alpha-numeric list in either direction.
3. Don't press the ENTER key until you have fi nished entering the data.
Remember, use the ROCKER key to move to the next placeholder.
Quick Start
Entering Data
Entering a name
UP
LEFT
RIGHT
DOWN
Rocker key Directions
9