Advertisement
Available languages
Available languages
One
Rinse
This is the rinse at the end of each cycle.
2nd Rinse
Choose this option for an automatic2nd rinsecycle.
Heavy
Duty
Use this cycle for sturdy or heavily soiled loads. For the
maximum soil removal, you should set the Cycle Selector
(Timer) Control for the longest available time.
Normal
Select this cycle for cottons and linens used regularly. It
provides up to 10 minutes of wash time. The fast-speed
spin shortens drying time.
Permanent
Press
I
This cycle will give you up to 10 minutes of wash time
and provides a load-cooling spray rinse to reduce
wrinkling.
Delicate
This cycle combines slow-speed agitation and slow-
speed spin to gently remove soils and reduce wrinkles.
Soak
This cycle features agitation followed by unlimited soak
time to help remove stains that need pretreatment. After
soaking, you have two options. To use the same water in
a wash cycle, advance the Cycle Selector (Timer) Control
knob to a wash cycle. To remove the soak water, reset
the washer to a Spin setting. If the Soak water was
drained, add more detergent to the wash cycle.
Prewash
This cycle helps to remove heavy soils that need pretreatment.
This cycle should be followed by a wash cycle. Add more
detergent to the wash cycle. The Prewash cycle does not
include a rinse.
2nd
Rinse
A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. May be automatically added to
the wash cycle by setting the OPTIONS Control to 2rid Rinse
before you start the washer. You won't have to come back later
to select a second rinse.
Rinse
& Spin
Select this option if you think an extra rinse is needed. Set
OPTIONS Control (if available) to One Rinse. You should then
set the Cycle Selector (Timer) Control knob to a Rinse setting.
Spin Only
A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set OPTIONS Control (if available)
to One Rinse. You should then set Cycle Selector (Timer)
Control to a Spin setting.
J
TROUBLESHOOTING = $8UN#$ and LEAKS
Before you call service...check
for the following.
Loud clicking and banging?
• The yellow shipping strap may still be in the rear of the
washer. Completely remove the yellow shipping strap.
• The washer should be level, and the feet should be firmly
on the floor.
Some sounds are normal but may be different from
those of your previous washer.
• The gears engaging after the drain and before the spin.
• The sound of air being pulled through the pump after most
of the water has drained.
Is the washer leaking?
• Fill hose connections are tight
• Gaskets in fill hose are tight and flat
• Drain hose clamp is securely attached
• Faucets, drain/standpipe or laundry tub is not leaking
• The washer tub is centered, and the load evenly balanced
at the start of each load
• The washer is level
• The front feet are installed, and the nuts are tightened
to the cabinet
See the Use and Care Guide for complete details.
8566814
® Registered Trademark
/ TM Trademark / SM Service Mark of
3/05
© 2005 Sears, Roebuck and Co.
Sears, Roebuck and Co., used under licensee by Sears Canada Inc.
Printed in U.S.A
Advertisement
